To Order:
Call (954) 456-1006
800-585-1285



To Order:
Call (954) 456-1006
800-585-1285

E-mail sales@brandlighting.com

Hours
Monday to Friday 9 to 5 EST
Saturday 10 to 5 EST
Sunday Closed

Se habla Español
We speak English,
Russian & Hebrew

Hadco Wall Washers - Accent Landscape Lighting

Click to email for more information.Hadco AAL1 Low Voltage, AAL1D LED Die-cast Aluminum Wall Washer Accent Landscape Lighting

Finish A Black
G Verde
Custom colors available for large orders.
FINISH: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B117 specifications. For larger projects where a custom color is required, contact the factory for more information.
WARRANTY: Three-year limited warranty.

Low Voltage
LAMPING: 27W maximum S-8 (1156) lamp. Lamp is included with fixture. Lower wattage lamps are acceptable.
ELECTRICAL ASSEMBLY: Single contact bayonet (S-8). 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Five-year limited warranty.

LED
LAMPING: 3,000K or 4,000K color temperature (CCT). Approximately 50,000 hours of operational life (at 25°C ambient temp. and 70% lumen maintenance).
ELECTRICAL ASSEMBLY: Input voltage range (VAC): 10 - 14. Input frequency: 60Hz. (magnetic low voltage transformer required). Integral surge protector built into LED driver circuit. 12 volts, 3.8 total watts consumed (high wattage) or 2.4 total watts consumed (low wattage). 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1W wire.
CCT: C2 Cool Low Power (2.4 total watts)
C3 Cool High Power (3.8 total watts)
W2 Warm Low Power (2.4 total watts)
W3 Warm High Power (3.8 total watts)

HOUSING: Die-cast aluminum. Stem is extruded aluminum. Fasteners are 300 series stainless steel. ½" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
OPTICAL ASSEMBLY: Lens is a clear polycarbonate shield.
IP RATING: IP66: Dust-tight and sealed against direct jets of water. 
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.

Height : 7 1/2" (191mm)
Width: 5 1/4" (133mm)
Depth: 2 1/8" (54mm)

Mounting S7 Mounting Stake

Call us at 800-585-1285 to order securely
Ask about Discounts or Sales



This chart is better viewed on a desktop computer or by turning your screen horizontal.
Voltage Lamp Wattage Finish Stock
AAL1-A57 Wall Light w/Stake 12v 27W 1156* Black Quick Ship
AAL1D-_S7 LED Wall Light(C3) Cool 3.8 Watt-LED & Stake Included 12v 3.8 Watt Black or Verde Quick Ship
AAL1D-_S7 LED Wall Light (W3) Warm 3.8 Watt 12v 3.8 Watt Black or Verde Quick Ship
AAL1D-_S7 LED Wall Light (C2) Cool 2.4 Watt 12v 2.4 Watt Black or Verde Quick Ship
AAL1D-_S7 LED Wall Light (W2) Warm 2.4 Watt 12v 2.4 Watt Black or Verde Quick Ship

Click to email for more information.Hadco AUL1 Low Voltage, AUL1D LED Composite Wall Washer Accent Landscape Lighting

Finish A Black
G Verde
FINISH: Composite is textured, pressure formed, molded-in-color.
WARRANTY: Ten-year limited warranty.

Low Voltage
LAMPING: 20W maximum T3 bi-pin lamp. Lamp is included with fixture. Lower wattage lamps are acceptable.
ELECTRICAL ASSEMBLY: Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

LED
LAMPING: 3,000K or 4,000K color temperature (CCT). Approximately 50,000 hours of operational life (at 25°C ambient temp. and 70% lumen maintenance).
ELECTRICAL ASSEMBLY: Input voltage range (VAC): 10 - 14. Input frequency: 60Hz. (magnetic low voltage transformer required). Integral surge protector built into LED driver circuit. 12 volts, 3.8 total watts consumed (high wattage) or 2.4 total watts consumed (low wattage). 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1W wire.
CCT C2 Cool Low Power (2.4 total watts)
C3 Cool High Power (3.8 total watts)
W2 Warm Low Power (2.4 total watts)
W3 Warm High Power (3.8 total watts)

HOUSING: One-piece injection molded ULTEM® High Performance Polymer composite. Fully-adjustable swivel arm with vibration-proof locking teeth. Fasteners are 300 series stainless steel. ½" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
OPTICAL ASSEMBLY: Lens is a clear polycarbonate shield.
IP RATING: IP66: Dust-tight and sealed against direct jets of water. 
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.

Height : 7 1/4" (184mm)
Width: 5 3/8" (137mm)
Depth: 2 5/8" (67mm)

Mounting S7 Mounting Stake

Call us at 800-585-1285 to order securely
Ask about Discounts or Sales


This chart is better viewed on a desktop computer or by turning your screen horizontal.
Voltage Lamp Wattage Finish Stock
AUL1-GS7 Ultem Wallyter w/Stake 12v 20W T3* Verde Quick Ship
AUL1D-_S7 LED Ultem Wallyter (C3) Cool 3.8 Watt- LED & Stake Included 12v 3.8 Watt Black or Verde Non Stock
AUL1D-_S7 LED Ultem Wallyter (W3) Warm 3.8 Watt- LED & Stake Included 12v 3.8 Watt Black or Verde Non Stock
AUL1D-_S7 LED Ultem Wallyter (C2) Cool 2.4 Watt- LED & Stake Included 12v 2.4 Watt Black or Verde Non Stock
AUL1D-_S7 LED Ultem Wallyter (W2) Warm 2.4 Watt- LED & Stake Included 12v 2.4 Watt Black or Verde Non Stock

Related Pages


design42 New Media Web Design
1804 Meadowbrook Terrace
Hendersonville NC 28791

To Order:
Call (954) 456-1006 or 800-585-1285