Hadco TSS373-13 Low Voltage Transformer

• 300 Series stainless steel housing
• Weather-proof compartment for plug-in time clock or plug-in photocell
  
• Stainless steel front cover
  
• 1/2" knockouts on each side for hardwiring or accessory mounting
  
• Enclosed bottom with six 1/2" conduit knockouts for indoor mounting
  
• High performance magnetic breakers
  
• 11, 12 and 13 volt taps for wiring each individual circuit on different voltage output
• Euro-Board terminal block for easy low voltage cable attachment
• Plug-In timer (order T5 or T6 accessory)
  
• Plug-In photo cell (order PC3 or PC15 accessory)
  
• 6-foot heavy duty 12 gauge power cord with molded plug
• UL and cUL Listed
• Indoor/Outdoor Listed
• Limited Lifetime warranty

Catalog

Description

Hadco TC644-15 Low Voltage Transformer

• Formed steel case with dark gray polyester powder-coat finish
• Weather-proof compartment for plug-in time clock or plug in photocell
• 1/2" knockouts on each side for hardwiring or accessory mounting
• Enclosed bottom with six 1/2" conduit knockouts for indoor mounting
• High performance magnetic breakers
• Lockable captive door, hinged on the bottom 11, 12 and 13 Volt taps for wiring each individual circuit on different voltage output
• Euro-Board terminal block for easy low voltage cable attachment
• Plug-in photo cell (order PC3 or PC15 accessory)
• 6-foot heavy duty power cord with molded plug
• UL and cUL Listed
• Indoor/Outdoor Listed
• 10-year warranty on powder-coat steel units

Catalog

Description

Hadco TCS301 Low Voltage Transformer

• 300 series stainless steel housing
  
• Lockable, captive door to wiring compartment
  
• Fully encapsulated coil for cool operation and long life
  
• Primary side thermal protection
  
• Shielding between primary and secondary circuits
  
• Hard wire triple tap secondary (11 volt, 12 volt, 13 volt fully loaded output)
  
• Four 1/2" knockouts, two on each side of can for line voltage wiring
  
• High-performance magnetic breakers on secondary circuit(s)
  
• Multiple 1/2" knockouts for low-voltage capability on bottom of housing
  
• Photo cell compatible (sold separately)
  
• 6-foot power cord with molded grounded plug
  
• Indoor/Outdoor, Pool/Spa UL listed
  
• Limited lifetime warranty

Catalog

Description

Catalog

Description

TCS901

900 VA Hardwire Transformer, stainless steel (300w x 3)

Inground Transformers

• UL and cUL Listed
• Fiberglass reinforced composite box with composite lid and silicone gasketing
• Separate wiring compartment with two 3/4" inlets
• Epoxy encapsulated transformer for cool, quiet, weather-proof operation
• Primary side thermal protection
• Shielded between primary and secondary circuits for safety 11, 12 and 13 volt output taps for design flexibility and longer cable run capability
• Multiple 1/2" knockouts for low-voltage capability on bottom of housing
• Waterproof connectors for low voltage cable outlets (one supplied with 300-watt unit, two supplied with 600-watt unit)
• Potting compound for line voltage wiring compartment supplied.
• 10-year warranty

Hadco TB100-12 Inground Transformer Cast Iron Box

• 100 VA/100 Watt
• 12 Volt Output Only
• Two 1 /2" Bottom Inlets
• One 1/2" Top Outlet
• .8 AMP Line Voltage Draw
• 4" (102mm) Width
• 5" (127mm) deep

Hadco TBU303-15 Transformer Composite Inground Box (TBC303-15)

• 300 VA/300 Watt
• 11, 12, 13 Volt Output Taps
• 2.7 AMP Line Voltage Draw

Hadco TBU603-15 Transformer Composite Inground Box (TBC603-15)

• 600 VA/300 Watt X 2
• 11, 12, 13 Volt Output Taps
• 5.5 AMP Line Voltage Draw

H.I.D. Ballast Boxes

• UL and cUL wet location listed.
• Above ground, steel, powder coated box
• Inground, fiberglass reinforced composite box
• Single and twin ballasts
• Three 3/4" bottom inlets on above ground boxes
• Two 3/4" inlets on inground boxes
• Mercury vapor and metal halide available
• Long range ignitors standard

Hadco Metal Halide Ballast Box

Maximum Distance To Lamp: 20 ft.

Hadco Rocket Perma-Post

• UL and cUL Listed
• Posts Suitable for wet locations
• Heavy wall, impact-resistant PVC
• Threaded 1/2" N.P.S. (13mm) hub with ground wire
• Slanted bottom accepts conduits of different depths
• PVC stabilizers included (no concrete needed)
• 3" or 3-1/2" O.D. (76mm or 89mm) available
• U.S. Patent 4, 858, 877
• Standard Length 19" (483mm). Other Lengths available
• Accepts "Y" or "T" fitters (by others)
• Available in white, black, bronze, natural brass or verde
• May be painted additional colors with water-base paint
• Use with UL listed wet location fixture

S1– Extruded aluminum stake, 10" (254mm) long with 1/2" N.P.S. (13mm) stainless locking screws. Black powder coat finish. Boxed 12 per carton.

This stake works for line voltage applications, consult your electrician

S6– Telescopic low voltage stake. Constructed of non-corrosive PVC. Field adjustable 2"-14" (51mm-356mm) above ground. Ideal for use in fast growing annual beds. (U.S. Patent 7, 741, 133). Boxed 12 per carton.

S7– Two-piece low voltage mounting stake. PVC stake 1-3/8" O.D. (35mm) x 12" (305mm) long with threaded 1/2" N.P.S. (13mm) removable fitter. Boxed 12 per carton.

S8/S8N- Low voltage mounting stake.

Two-piece low voltage mounting stake. PVC stake 1-3/8" O.D. (35mm) x 15" (375mm) long with threaded 1/2" N.P.S. (13mm) removable fitter. Boxed 12 per carton.

M0028A– Portable line voltage stake. Cast aluminum with 8 foot (244mm) 3-wire power cord and plug. 8" (203mm) long with 1/2" N.P.S. conduit inlet. Black powder coat finish.

Low Voltage Cable — Single Circuit

SCW100-12– 12V, 2 conductor, 12 gauge, 100 ft.
SCW500-12– 12V, 2 conductor, 12 gauge, 500 ft.
SCW500-10– 12V, 2 conductor, 10 gauge, 500 ft.

LVC3– Positive lock screw design. Heavier prongs for a more positive connection and a double-sided bottom that ensures proper fit for single and twin circuit wire. Boxed 12 per carton.

LVC4– “T" connector for 2 or 3 wire low voltage cable. Use to branch off existing low voltage cable for additional runs. Boxed 12 per carton.

BI1– Hot dipped galvanized cast iron junction box. 4" (102mm) square x 3" high (76mm) with 1/2" N.P.S. (13mm) top inlet and two 1/2" N.P.S. (13mm) bottom inlets.

BI2– Hot dipped galvanized cast iron junction box. 4" (102mm) square x 3" high (76mm) with 1/2" N.P.S. (13mm) top inlet and two 3/4" N.P.S. (19mm) bottom inlets.

BI3– Hot dipped galvanized cast iron junction box. 4" (102mm) square x 3" high (76mm) with 1/2" N.P.S. (13mm) top inlet and four 1/2" (13mm) N.P.S. side inlets and two 1/2" N.P.S. (13mm) bottom inlets.

BI4– Hot dipped galvanized cast iron junction box. 4" (102mm) square x 3" high (76mm) with 1/2" N.P.S. (13mm) top inlet and two 1/2" N.P.S. (13mm) side inlets and two 1/2" N.P.S. (13mm) bottom inlets.

MC1N– Low voltage mounting canopy. Cast brass with 1/2" N.P.S. inlet. Suitable for trees, soffit, wall or deck mounting of many NightLife low voltage fixtures. 2-7/8" (73mm) round. Boxed 6 per carton.

MC1– Low voltage mounting canopy. Cast aluminum with 1/2" N.P.S. inlet. Suitable for trees, soffit, wall or deck mounting of many NightLife low voltage fixtures. 2-7/8" (73mm) round. Boxed 6 per carton.

MA11– Grommet-ended wire ties. The perfect accessory to fasten low voltage cable to a tree without allowing tree to grow around the cable. Constructed of UV stabilized, black polyester material. Seven inches long. Boxed 100 per carton.

CB1– Precast concrete block with integral cast aluminum splice box and three 1/2" (13mm) top outlets to hold landscape fixtures, floodlights or devices. Splice box has three 3/4" N.P.S. (19mm) bottom inlets. Dimensions: 9-1/4" Length (235mm) x 7-3/8" width (187mm) x 3" deep (76mm).

T5– Plug-in analog transformer time clock.

T6– Plug-In Digital transformer time clock with lithium battery back-up

M0029– Cast aluminum junction box. 4" (102mm) x 2-1/4" (57mm) with 1/2" N.P.S. (13mm) top inlet and four 1/2" N.P.S. (13mm) side inlets.

M0040– Low voltage mounting canopy. 5" (127mm) square.

TM2H– Line voltage tree mount cast aluminum junction box. Bronze finish. Combination lag screw with hex nuts included.

TMC2H– Line voltage tree mount composite junction box. Bronze finish. Combination lag screw with hex nuts included. UL & cUL Listed.

TM1H– Low voltage tree mount canopy. Bronze finish. Combination lag screws with hex nuts included.

PC1– Hardwire photo cell. Finger type, adjustable photo control. 1/2" N.P.S. for mounting. 120 vo Light

PC15– Plug-in photo cell, 15-foot lead for remote mount

PC3– Plug-in photo cell, 3" lead for direct mount to transformer housing

MA1– Re-enterable encapsulant for inground installations. Two-part field mixable material in one convenient package. Boxed 6 per carton.

MA2– Marker flags. Vinyl 3" (76mm) x 5" (127mm) on 18" (457mm) stem with area for writing model numbers and lamp numbers. Boxed 50 per carton.

MA4– Corrosion preventive compound. Two ounce tube. Specially formulated non-conductive sealant and corrosion preventative. For use on sockets and electrical contacts. Boxed 6 per carton.

MA22– Silicone-filled wire connectors. Necessary to protect splicings from moisture and oxidation. Handles up to 10 gauge wire. Boxed 25 per carton.

MF1– Pack of 12 combination galvanized lag screws with hex nuts for attaching canopies and ballast boxes in trees.

finishes and Materials

Hadco makes it easier than ever to select the right color for your exquisite landscape
design with a full palette of colors and textures. Expand your design capabilities with new finishes that are sure to compliment your commercial or residential landscape lighting needs.

For an aged appearance, Oiled and Verde Brass materials have been added to the NightLife fixture choices for a step back in time.

And for more earthy settings, there is the Speckled Stone finish, which is at home among foliage as well as any number of masonry materials.