Hadco Deck Lights

Deck lighting balances safety and aesthetics to round out your landscape design by illuminating pool and deck areas. Hadco deck lights are available in a variety of traditional designs and finishes. The Hadco deck lighting series includes the round StepLyte collection for along posts and to light up stairs as well as the LineLyte series which provides step lighting through linear strips of copper lighting. Hadco also includes deck lighting for along the handrails and outer perimeter of decks. These deck lights have a 90 degree back to them allowing them to fit under corners and in tough to illuminate spaces like under steps and handrails. Rounding out the Hadco deck lighting product selection are oblong and mushroom style deck lights that are often used throughout the outdoor living area. By using hand applied finishes and traditional materials such as copper, Hadco creates accent deck lighting that blends naturally into your traditional outdoor landscape. If you are looking for modern deck lighting options consider WAC and Eurofase deck lights. At Brand Lighting we carry 1000s of outdoor deck lights for your deck and pool areas. Designers and trade professionals can access wholesale pricing on deck lighting through our Trade Program. Contact us today to learn more or for ordering information (888) 991-3610.

ASK US ABOUT DECK LIGHTING PRICING & INFORMATION

Submit
Hadco GADL1, GADL2 Low Voltage Copper Deck lights

Hadco GADL1, GADL2 Low Voltage Copper Deck lights

Hadco GADL1, GADL2 Low Voltage Copper Deck lights

Finish: AC Hand-Crafted Copper 
Antique Copper (AC) is a hand-applied dark copper patina.

GADL1: Hand-formed solid copper. Copper back plate. 

GADL2: Hammered solid copper with copper back plate.

Low Voltage

LAMPING: 12W maximum wedge base T3-¼ lamp. 10W wedge base T3 ¼ (xenon) lamp is included with fixture. Xenon lamp life is approximately 10,000 hours. Lamp does not need to be protected and can be directly handled. 

ELECTRICAL ASSEMBLY: Wedge base socket type (T3-¼ or T5). 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

INSTALLATION & MOUNTING: Two (2) Stainless #8 wood screws (supplied) via key slots. 
WARRANTY: Ten-year limited warranty. .

CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.

VoltageLamp WattageFinishStock
GADL1-ACCopper Decklyte w/Lamp12v10W Xenon T3CopperQuick Ship
GADL2-ACHammered Copper Decklyte12v10W Xenon T3CopperQuick Ship
Hadco GADL1, GADL2 Low Voltage Copper Deck lights

Hadco GADL2 Copper DeckLyte

Hadco GADL1, GADL2 Low Voltage Copper Deck lights

Hadco GADL1 Copper DeckLyte

Hadco GADL1, GADL2 Low Voltage Copper Deck lights
Hadco GADL1, GADL2 Low Voltage Copper Deck lights

Hadco CUL20 12 Volt Copper Deck Light

Hadco CUL20 12 Volt Copper Deck Light

Hadco CUL20 12 Volt Copper Deck Light

Hadco CUL20 12 Volt Copper Deck Light

Finish: Natural Copper 
Natural Copper is bright polished, untreated copper. Color will age naturally to a fine dark copper patina.

GADL20: Spun solid copper. Copper back plate.

Low Voltage

LAMPING: 12W maximum wedge base T3-¼ lamp. 10W wedge base T3 ¼ (xenon) lamp is included with fixture. Xenon lamp life is approximately 10,000 hours. Lamp does not need to be protected and can be directly handled. 

ELECTRICAL ASSEMBLY: Wedge base socket type (T3-¼ or T5). 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

OPTICAL ASSEMBLY: Reflective white powdercoat on underside of roof. 
INSTALLATION & MOUNTING: Two (2) Stainless #8 wood screws (supplied) via key slots. 
WARRANTY: Ten-year limited warranty. 

CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.

Height : 2 9/16" (65mm)
Width: 4" (102mm)
Depth: 1 3/4" (52mm)

VoltageLamp WattageFinishStock
CUL20Copper Bell Shaped Decklyte w/Lamp12v10W Xenon T3CopperQuick Ship

Hadco GADL4 Copper 4x4 Post Top Low Voltage Copper deck lighting

Hadco GADL4 Copper 4x4 Post Top Low Voltage Copper deck lighting

Hadco GADL4 Copper 4x4 Post Top Low Voltage Copper deck lighting

Hadco GADL4 Copper 4x4 Post Top Low Voltage Copper deck lighting

Housing: Hand-formed solid copper. Fasteners are 400 Series brass. Post Fitter - 4" x 4" formed solid copper fitter. Fits over a standard wooden 4" x 4" post. Fixture attaches to surface through internally mounted stainless screws. 

Finish: Natural Copper is bright polished, untreated copper. Color will age naturally to a fine dark copper patina. 

Optical Assembly: Field Adjustable four-sided house-side shield allows light distribution from 1, 2, 3 or all 4 sides. Polycarbonate refractive lens. Reflector is a stamped specular aluminum. 

Lamping: 20W maximum T3 bi-pin lamp. 10W T3 lamp is included with fixture. Electrical Assembly: Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 volt fixture is pre-wired with 6-ft. Pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included. 
Installation: & Mounting: Two (2) stainless #8 wood screws (included). 

WARRANTY: Lifetime limited warranty. 

CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards. 


Height: 3 3/16" (81mm)
Width: 4 9/16" (116mm)
Base Dimensions: 3 1/2" (89mm)

VoltageLamp WattageFinishStock
GADL4-AC4X4 Post Top Copper Decklyte12v10W Xenon T3CopperQuick Ship

Hadco GACL1, GACL2 Low Voltage Copper deck lights

Hadco GACL1, GACL2 Low Voltage Copper deck lights

Hadco GACL1, GACL2 Low Voltage Copper deck lights

Hadco GACL1, GACL2 Low Voltage Copper deck lights

Hadco GACL1, GACL2 Low Voltage Copper deck lights

Finish AC Hand-Crafted Copper 
Antique Copper (AC) is a hand-applied dark copper patina.

HOUSING: Hand-formed solid copper.

Low Voltage 

LAMPING: 12W maximum wedge base T3-¼ lamp. 10W wedge base T3 ¼ (xenon) lamp is included with fixture. Xenon lamp life is approximately 10,000 hours. Lamp does not need to be protected and can be directly handled. Lower wattage lamps are acceptable. 

ELECTRICAL ASSEMBLY: Wedge base socket type (T3-¼ or T5). 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

GACL1 Copper 
Bottom is open. Down light.

Height : 5 1/8" (130mm)
Width: 2 15/16" (75mm)
Depth: 1 9/16" (40mm)

GACL2 Copper 
Top and bottom are open. Up and down light.
Optical Assembly: Frosted tempered glass top cap.

Height : 5 1/8" (130mm)
Width: 2 15/16" (75mm)
Depth: 1 9/16" (40mm)

INSTALLATION & MOUNTING: Two (2) Stainless #8 wood screws (supplied) via key slots. 

WARRANTY: Ten-year limited warranty. 

CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.

VoltageLamp WattageFinishStock
GACL1-ACCopper 1/2 Cylinder Decklyte, Downlyte w/Lamp12v10W Xenon T3CopperQuick Ship
GACL2-ACCopper 1/2 Cylinder Decklyte, Up/Downlyte w/Lamp12v10W Xenon T3CopperQuick Ship

Hadco SRL3, SRL4 Low Voltage Die-cast Aluminum deck lights

Hadco SRL3, SRL4 Low Voltage Die-cast Aluminum deck lights

Hadco SRL3, SRL4 Low Voltage Die-cast Aluminum deck lights

Hadco SRL3, SRL4 Low Voltage Die-cast Aluminum deck lights

Hadco SRL3, SRL4 Low Voltage Die-cast Aluminum deck lights

Hadco SRL3, SRL4 Low Voltage Die-cast Aluminum deck lights

Finish
A Black 
H Bronze 
B White (SRL4 only)
G Verde (SRL4 only)

FINISH: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B117 specifications.

SRL3
LAMPING: 18W maximum S-8 (1141) lamp. Lamp is included with fixture. Lower wattage lamps are acceptable. 

ELECTRICAL ASSEMBLY: Single contact bayonet (S-8). 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

Height : 4 3/8" (111mm)
Width: 2 1/2" (64mm)
Depth: 2 1/16" (52mm)

SRL4
LAMPING: 12W maximum wedge base T3-¼ lamp. 10W wedge base T3 ¼ (xenon) lamp is included with fixture. Lower wattage lamps are acceptable. Xenon lamp life is approximately 10,000 hours. Lamp does not need to be protected and can be directly handled. 

ELECTRICAL ASSEMBLY: Wedge base socket type (T3-¼ or T5). 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

Height : 2 3/8" (60mm)
Width: 3 1/2" (89mm)
Depth: 2" (51mm)

HOUSING: Die-cast aluminum. Fasteners are 300 series stainless steel.

OPTICAL ASSEMBLY: Frosted tempered glass lens. 

INSTALLATION & MOUNTING: Two (2) Stainless #8 wood screws (supplied) via key slots. 

WARRANTY: Three-year limited warranty. 

CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.

 VoltageLamp WattageFinishStock
SRL3-ADecklyte w/Lamp12v10W Xenon T3BlackQuick Ship
SRL3-HDecklyte w/Lamp12v10W Xenon T3BronzeQuick Ship
SRL4-ADecklyte w/Lamp12v10W Xenon T3BlackQuick Ship
SRL4-BDecklyte w/Lamp12v10W Xenon T3WhiteQuick Ship
SRL4-GDecklyte w/Lamp12v10W Xenon T3VerdeQuick Ship
SRL4-HDecklyte w/Lamp12v10W Xenon T3BronzeQuick Ship

Hadco DAL1, DAL1D, DCL1, DCL1D, DUL1, DUL1D LED Die-cast Aluminum, Die-cast Brass or Composite deck lights with LED options

Hadco DAL1, DAL1D, DCL1, DCL1D, DUL1, DUL1D LED Die-cast Aluminum, Die-cast Brass or Composite deck lights with LED options

Hadco DAL1, DAL1D, DCL1, DCL1D, DUL1, DUL1D LED Die-cast Aluminum, Die-cast Brass or Composite deck lights with LED options
Hadco DAL1, DAL1D, DCL1, DCL1D, DUL1, DUL1D LED Die-cast Aluminum, Die-cast Brass or Composite deck lights with LED options
Hadco DAL1, DAL1D, DCL1, DCL1D, DUL1, DUL1D LED Die-cast Aluminum, Die-cast Brass or Composite deck lights with LED options

Hadco DAL1, DAL1D, DCL1, DCL1D, DUL1, DUL1D LED Die-cast Aluminum, Die-cast Brass or Composite deck lights with LED options

Hadco DAL1, DAL1D, DCL1, DCL1D, DUL1, DUL1D LED Die-cast Aluminum, Die-cast Brass or Composite deck lights with LED options

Hadco DAL1, DAL1D, DCL1, DCL1D, DUL1, DUL1D LED Die-cast Aluminum, Die-cast Brass or Composite deck lights with LED options

Hadco DAL1, DAL1D, DCL1, DCL1D, DUL1, DUL1D LED Die-cast Aluminum, Die-cast Brass or Composite deck lights with LED options

Die-cast Aluminum Finish:
(A) Black
(B) White
(G) Verde
(H) Bronze
(T) Speckled Stone
(U) Sienna
(SS) Stainless Steel

FINISH: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B117 specifications.

HOUSING: Body and mounting plate are cast aluminum construction.

Composite Finish:
(A) Black
(G) Verde
(H) Bronze

FINISH: Composite is textured, pressure formed, molded-in-color. 

HOUSING: One-piece injection molded ULTEM® High Performance Polymer composite.

Brass
Die-cast brass. 
FINISH: Natural Brass (N) is as-cast and tumble polished.

Low Voltage 
LAMPING: Color Temperature (CCT): 4,000K nominal or 3,000K nominal. Approximately 50,000 hours of operational life (at 25°C ambient temp. and 70% lumen maintenance). >80 CRI.

ELECTRICAL ASSEMBLY: Input voltage range (VAC): 11 - 15, (Magnetic low voltage transformer required). 1.7 total watts consumed. 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire.

LED
LAMPING: Color Temperature (CCT): 4,000K nominal or 3,000K nominal. Approximately 50,000 hours of operational life (at 25°C ambient temp. and 70% lumen maintenance). >80 CRI. CCT W Warm 3000K or C Cool 4000K

HOUSING: Fasteners are 300 series stainless steel. 

OPTICAL ASSEMBLY: Frosted, annealed glass lens. Reflector is a stamped specular aluminum.

INSTALLATION & MOUNTING: Two (2) Stainless #8 wood screws (supplied) via key slots.

IP RATING: IP67: Dust-tight and dual rated - sealed against direct jets of water and against continuous immersion up to a depth of 1 meter (3.28 feet).

WARRANTY: Five-year limited warranty. 

CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.

Height : 3 1/2" (89mm)
Width: 3 1/2" (89mm)
Depth: 1 7/8" (48mm)

 VoltageLamp WattageFinishStock
DAL1-ARound Steplyte12v10W T3BlackQuick Ship
DAL1-BRound Steplyte12v10W T3WhiteQuick Ship
DAL1-GRound Steplyte12v10W T3VerdeQuick Ship
DAL1-HRound Steplyte12v10W T3BronzeQuick Ship
DAL1-SSRound Steplyte12v10W T3Stainless Matte FinishQuick Ship
DAL1-TRound Steplyte12v10W T3Speckled StoneNon Stock
DAL1DLED Round Steplyte w/LED- CCT Warm or Cool12v1.7WBlack, White, Verde, Bronze, Speckled Stone, Stainless SteelNon Stock
DAL1D_-SSLED Round Steplyte w/LED- CCT Warm or Cool12v1.7WStainless SteelNon Stock
DCL1-NBrass Round Steplyte w/Lamp12v10W T3BrassQuick Ship
DCL1DBrass Round Steplyte w/LED- CCT Warm or Cool12v1.7WBrassQuick Ship
DUL1-ARound Ultem Decklyte w/Lamp12v10W T3BlackQuick Ship
DUL1-GRound Ultem Decklyte w/Lamp12v10W T3VerdeQuick Ship
DUL1-HRound Ultem Decklyte w/Lamp12v10W T3BronzeQuick Ship
DUL1DRound LED Ultem Decklyte w/LED- CCT Warm12v1.7WVerdeNon Stock
DUL1DRound LED Ultem Decklyte w/LED- CCT Warm12v1.7WBlack or BronzeQuick Ship
DUL1DRound LED Ultem Decklyte w/LED- CCT Cool12v1.7WBlack, Verde, BronzeNon Stock

Hadco RL13 Composite Low Voltage deck lights

Hadco RL13 Composite Low Voltage deck lights

Hadco RL13 Composite Low Voltage deck lights

Hadco RL13 Composite Low Voltage deck lights

Finish: A Black

Low Voltage 

LAMPING: 10W maximum T3 bi-pin lamp. 10W T3 lamp is included with fixture. Lower wattage lamps are acceptable. 

ELECTRICAL ASSEMBLY: Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

HOUSING: Injection-molded RYTON® composite and polycarbonate. Fasteners are 300 series stainless steel.

FINISH: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B117 specifications. Composite is textured, pressure formed, molded-in-color.

OPTICAL ASSEMBLY: Molded prismatic acrylic polycarbonate to allow adjustable light distribution.

INSTALLATION & MOUNTING: Two (2) Stainless #8 wood screws (supplied) via key slots.

WARRANTY: Ten-year limited warranty.

CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.

Height : 1 15/16" (49mm)
Width: 3 3/8" (86mm)
Depth: 2 3/16" (55mm)

 VoltageLamp WattageFinishStock
RL13-AComposite Decklyte w/Lamp12v10W T3 HalogenBlackQuick Ship

Hadco RL13 Composite Low Voltage deck lights

Hadco RL13 Composite Low Voltage deck lights

Hadco RL13 Composite Low Voltage deck lights

Hadco DSL2 Low Voltage Die-cast Aluminum Directable DOWN LIGHT

Finish:
A Black 
B White

Low Voltage 

LAMPING: 18W maximum S-8 (1141) lamp. Lamp is included with fixture. Lower wattage lamps are acceptable.

ELECTRICAL ASSEMBLY: Single contact bayonet (S-8). 12 Volt fixture is pre-wired with 8-ft pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

HOUSING: Machined aluminum top cap and cast aluminum body with adjustable yoke. Fasteners are 300 series stainless steel.

FINISH: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B117 specifications.

OPTICAL ASSEMBLY: Frosted tempered glass lens.

WARRANTY: Three-year limited warranty.

CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.

Height : 3 5/8" (92mm)
Width: 2 1/2" (64mm)

 VoltageLamp WattageFinishStock
DSL2-ASquare Surface Downlyte with Bracket w/Lamp12v18W 1141BlackQuick Ship
DSL2-BSquare Surface Downlyte with Bracket w/Lamp12v18W 1141WhiteQuick Ship

Hadco LLL6-AC, LLL12-AC, LLL24-AC LineLyte Copper Step LIGHTS & Deck Lights

LLL AC Antique Copper StepLytes

Mount using Stainless wood screws (supplied) via key slots or use Mounting Plate MPLLL.

Hadco LLL6-AC, LLL12-AC, LLL24-AC LineLyte Copper Step LIGHTS & Deck Lights

Hadco LLL6-AC, LLL12-AC, LLL24-AC LineLyte Copper Step LIGHTS & Deck Lights

HADCO's new LineLyte Series provides a unique way to enhance your deck or patio area. Available in Lengths ranging from 6" to 24", these natural copper fixtures mount easily under steps or railings to provide illumination for atmosphere and safety without the need to cut holes in or deface step risers. They mount with (2) screws via key slots on the top of the fixture. These fixtures use a 10,000 hour Xenon T3 lamp (included) for superior lighting and low maintenance while the socket swivels down for easy re-lamping.

Finish : AC Hand-Crafted Copper

Low Voltage 

LAMPING: 10W wedge base T3 ¼ (xenon) lamps included with fixture. Xenon lamp life is approximately 10,000 hours. Lower wattage lamps are acceptable. Lamp does not need to be protected and can be directly handled. 

ELECTRICAL ASSEMBLY: Wedge base socket type (T3-¼ or T5). Socket is hinged for easy relamping. 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

Hadco LLL6-AC, LLL12-AC, LLL24-AC LineLyte Copper StepLyte & Deck Lights

HOUSING: Seamless solid copper extrusions with solid copper ends. Tool-less lamp access. 
FINISH: Natural Copper is bright polished, untreated copper. Color will age naturally to a fine dark copper patina.

OPTICAL ASSEMBLY: Reflector is Stainless Steel. 

INSTALLATION & MOUNTING: Two (2) Stainless #8 wood screws (supplied) via key slots.

WARRANTY: Ten-year limited warranty.

CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.

Height : 1" (25mm)
Width: 1" (25mm)
Length: 6", 12", 24" Length

LineLyte Mounting Plate (MPLLL)

LineLyte Mounting Plate (MPLLL)

LineLyte Mounting Plate (MPLLL)

FINISH: Stainless Steel has satin Matte Finish. 

MOUNTING: Brackets attach to Linelyter with two hex nuts (included).

Bracket is inserted between two blocks or bricks, held in place by the top block.

VoltageLamp WattageFinishStock
LLL6-ACCopper Linelyte, 6"12v10w Xenon T3*CopperQuick Ship
LLL12-ACCopper Linelyte, 12"12v10w Xenon T3*CopperQuick Ship
LLL24-ACCopper Linelyte, 24"12v (2)10w Xenon T3*CopperQuick Ship
Accessories
MPLLLMounting Plate for LLLQuick Ship