Hadco 1020-H Bronze 120 Volt Flood Light

Finish: H Bronze

Line Voltage
LAMPING: 150W maximum PAR38/R40 incandescent lamp. 
ELECTRICAL ASSEMBLY: 4kv rated porcelain mini-can base. Nickel-plated screw shell with center contact.

HOUSING: Die-cast aluminum. Fully-adjustable swivel arm with vibration-proof locking teeth. 
WARRANTY: Three-year limited warranty. 
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.

Width: 6" (152mm)
Length: 7 3/16" (183mm)

Hadco WAML14, WAML14F Low Voltage Flood Light
Mini Architectural Flood Light with Shroud

Finish: Black, White, Verde, Bronze 
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.

WAML14FHS720T3 Mini Architectural 12v 20w t3
Optical Assembly: Frosted tempered glass lens. 
Lamping: 20W maximum T3 halogen. Lamp is included with fixture. Lower wattage lamps are acceptable.

WAML14FAS735T3 Mini Architectural 12v 35w t3
Optical Assembly: Frosted tempered glass lens. 
Lamping: 35W maximum T3 halogen. Lamp is included with fixture. Lower wattage lamps are acceptable.

WAML14 Mini Architectural Flood with Shroud 12V 50W T4
Optical Assembly: Clear tempered glass lens. 
Lamping: 50W maximum T4 halogen. Lamp is included with fixture. Lower wattage lamps are acceptable.

WAML14F Mini Architectural Flood with Shroud and Frosted Lens 12V 50W T4
Optical Assembly: Frosted tempered glass lens. 
Lamping: 50W maximum T4 halogen. Lamp is included with fixture. Lower wattage lamps are acceptable.

Housing: Die-cast aluminum. gasketing is silicone. Fully-Adjustable swivel arm with vibration-proof locking teeth. Fasteners are 300 Series stainless steel. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately. Electrical Assembly: Bi-pin socket type (GY6.35) with 250° C high temperature teflon coated wire leads. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included. 
WARRANTY: Three-year limited warranty. 
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards. 
Height: 4 7/8" (123mm)
Width: 6 7/8" (175mm)
Length: 5" (127mm)

VoltageLamp WattageFinishStock
WAML1DLED Flood Light w/LED- Lens Frosted or Clear, CCT Cool 3.8W, Warm 3.8W, Cool 2.4W, Warm 2.4W12v50W T4Black, White, Verde, BronzeNon Stock
WBML1DLED Flood Light w/LED- Lens Frosted or Clear, CCT Cool 3.8W, Warm 3.8W, Cool 2.4W, Warm 2.4W12v50W T4Black, White, Verde, BronzeNon Stock
WAML14F-AS720T3Flood Light Frosted Lens w/Stake, Lamp12v20W T3BlackQuick Ship
WAML14F-GS720T3Flood Light Frosted Lens w/Stake, Lamp12v20W T3VerdeNon Stock
WAML14F-HS720T3Flood Light Frosted Lens w/Stake, Lamp12v20W T3BronzeQuick Ship
WAML14F-AS735T3Flood Light Frosted Lens w/Stake, Lamp12v20W T3BlackNon Stock
WAML14F-GS735T3Flood Light Frosted Lens w/Stake, Lamp12v20W T3VerdeNon Stock
WAML14F-HS735T3Flood Light Frosted Lens w/Stake, Lamp12v20W T3BronzeNon Stock
Accessories
MW12Louver for WAM1, WBM1Quick Ship

Hadco WAM1D, WBM1D Line Voltage LED Flood Light 
Mini Architectural Flood Light with Shroud

Finish: Black, White, Verde, Bronze 
Finish: Exterior Coating: Either Urethane or Triglycidyl Isocyanurate (TGIC) Polyester Powder to a minimum dry film thickness of 2.0 mils (0.002") for urethane powder, or 3.0 mils (0.003") for TGIC powder. The coating is electrostatically applied and cured in a gas fired convection oven by heating to a minimum of 350°F and a maximum of 400°F. Following a 5-stage conversion cleaning process, the components are finished with a super-durable, electrostatically applied, thermoset polyester powdercoat which is bonded by heat fusion thermosetting. The finish is laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.

Housing: 380 die-cast aluminum alloy. Fasteners are 300 Series stainless steel to prevent corrosion and ensure longer life. gasketing is silicone. Fully-Adjustable swivel arm with vibration-proof locking teeth. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately. 
Optical Assembly: Clear or frosted tempered glass lens. 
Lamping: 5,000K color temperature (CCT) or 3,000K amber coated tempered glass lens. Approximately 50,000 hours of operational life (at 25 C ambient temperature and 70% lumen maintenance). >80 CRI. Lamp is included with fixture. Electrical Assembly: Fixture is pre-wired with 18AWG Black, white and ground wires. Smart Select Electronic Driver 120 to 277 VAC input; 50-60Hz; auto-sensing.12 total watts consumed. 
WARRANTY: 5 year extended warranty 
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards. 
Height: 4 7/8" (123mm)
Width: 6 7/8" (175mm)
Length: 5" (127mm)

VoltageLamp WattageFinishStock
WAM1DLED Flood Light w/LED- Lens Frosted or Clear, CCT Cool or Warm120vBlack, White, Verde, BronzeNon Stock
WBM1DLED Flood Light w/LED- Lens Frosted or Clear, CCT Cool or Warm120vBlack, White, Verde, BronzeNon Stock
Accessories     
MW12Louver for WAM1, WBM1Quick Ship  

Hadco WAML1D, WBML1D Low Voltage LED Flood Light 
Mini Architectural Flood Light with Shroud

Finish: Black, White, Verde, Bronze 
Finish: Exterior Coating: Either Urethane or Triglycidyl Isocyanurate (TGIC) Polyester Powder to a minimum dry film thickness of 2.0 mils (0.002") for urethane powder, or 3.0 mils (0.003") for TGIC powder. The coating is electrostatically applied and cured in a gas fired convection oven by heating to a minimum of 350°F and a maximum of 400°F. Following a 5-stage conversion cleaning process, the components are finished with a super-durable, electrostatically applied, thermoset polyester powdercoat which is bonded by heat fusion thermosetting. The finish is laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.

Housing: 380 die-cast aluminum alloy. Fasteners are 300 Series stainless steel to prevent corrosion and ensure longer life. gasketing is silicone. Fully-Adjustable swivel arm with vibration-proof locking teeth. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately. 
Optical Assembly: Clear or frosted tempered glass lens. 
Lamping: Cool White (6,000K) Warm White (3,000K) Lamp is included with fixture. Electrical Assembly: 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. 12 Volt system requires remote transformer, not included. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. Input voltage range (VAC): 10.8 - 17.5. Input frequency: 60Hz. (magnetic low voltage transformer required). Integral surge protector built into LED driver circuit. 12 volts, 6.4 total watts (high wattage) or 3.7 total watts (low wattage). 
WARRANTY: 5 year extended warranty 
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards. 
Height: 4 7/8" (123mm)
Width: 6 7/8" (175mm)
Length: 5" (127mm)

VoltageLamp WattageFinishStock
WAML1DLED Flood Light w/LED- Lens Frosted or Clear, CCT Cool 3.8W, Warm 3.8W, Cool 2.4W, Warm 2.4W12v50W T4Black, White, Verde, BronzeNon Stock
WBML1DLED Flood Light w/LED- Lens Frosted or Clear, CCT Cool 3.8W, Warm 3.8W, Cool 2.4W, Warm 2.4W12v50W T4Black, White, Verde, BronzeNon Stock

Hadco WAMT14, WAMT14F Line Voltage Flood Light with Integral Transformer
Mini Architectural Flood Light with Integral Transformer and Shroud

Finish: Black, Bronze 
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.

WAMT14 Mini Architectural Flood 120V 50W T4
Optical Assembly: Clear tempered glass lens. 
Lamping: 50W maximum T4 halogen. Lamp is included with fixture. Lower wattage lamps are acceptable.

WAMT14F Mini Architectural Flood with Frosted Lens 120V 50W T4
Optical Assembly: Frosted tempered glass lens. 
Lamping: 50W maximum T4 halogen. Lamp is included with fixture. Lower wattage lamps are acceptable.

Housing: Die-cast aluminum. gasketing is silicone. Fully-Adjustable swivel arm with vibration-proof locking teeth. Fasteners are 300 Series stainless steel. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately. Electrical Assembly: Bi-pin socket type (GY6.35) with 250° C high temperature teflon coated wire leads. Fixture is pre-wired with 18 AWG Black, white and ground wires. Step-down transformer reduces line voltage to 12 volts. Transformer is potted/encapsulated and features thermal overload protection. Can be used with energy-efficient halogen lamp.
WARRANTY: Three-year limited warranty. 
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards. 
Height: 7 7/16" (189mm)
Width: 6 7/8" (175mm)
Length: 5 1/16" (128mm)

VoltageLamp WattageFinishStock
WAMT14-AFlood Light w/Integral Transformer, Shroud & Lamp 12v50W T4BlackNon Stock
WAMT14-HFlood Light w/Integral Transformer, Shroud & Lamp 12v50W T4BronzeQuick Ship
WAMT14F-AFlood Light w/Integral Transformer, Frosted Lens & Lamp 12v50W T4BlackNon Stock
WAMT14F-HFlood Light w/Integral Transformer, Frosted Lens & Lamp 12v50W T4BronzeNon Stock

Hadco WBML14 Low Voltage Die-cast Aluminum Mini Architectural Flood Light
NO Shroud

Finish: Black, White, Verde, Bronze 
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.

Housing: Die-cast aluminum. gasketing is silicone. Fully-Adjustable swivel arm with vibration-proof locking teeth. Fasteners are 300 Series stainless steel. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately. 
Optical Assembly: Frosted tempered glass lens. Clear tempered glass lens. 
Lamping: 35W maximum T3 halogen. Lamp is included with fixture. Lower wattage lamps are acceptable. Electrical Assembly: Bi-pin socket type (GY6.35) with 250° C high temperature teflon coated wire leads. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included. 
WARRANTY: Three-year limited warranty. 
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards. 
Height: 4 7/8" (123mm)
Width: 6 7/8" (175mm)
Length: 3 7/8" (96mm)

VoltageLamp WattageFinishStock
WBML14F-AS720T3Flood Light Frosted Lens w/Stake, Lamp12v20W T3BlackNon Stock
WBML14F-BS720T3Flood Light Frosted Lens w/Stake, Lamp12v20W T3WhiteNon Stock
WBML14F-GS720T3Flood Light Frosted Lens w/Stake, Lamp12v20W T3VerdeNon Stock
WBML14F-HS720T3Flood Light Frosted Lens w/Stake, Lamp12v20W T3BronzeNon Stock
WBML14F-AS735T3Flood Light Frosted Lens w/Stake, Lamp12v35W T3BlackNon Stock
WBML14F-BS735T3Flood Light Frosted Lens w/Stake, Lamp12v35W T3WhiteNon Stock
WBML14F-GS735T3Flood Light Frosted Lens w/Stake, Lamp12v35W T3VerdeNon Stock
WBML14F-HS735T3Flood Light Frosted Lens w/Stake, Lamp12v35W T3BronzeNon Stock
Accessories
MW11Barn Doors WBM1Black, White, Verde, BronzeNon Stock
MW12Louver for WAM1, WBM1Quick Ship

Hadco WBMT14, WBMT14F Line Voltage Die-cast Aluminum Micro FloodLyte with Integral Transformer
NO Shroud

Finish: Black, Bronze 
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.

Housing: Die-cast aluminum. gasketing is silicone. Fully-Adjustable swivel arm with vibration-proof locking teeth. Fasteners are 300 Series stainless steel. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately. 
Optical Assembly: Clear tempered glass lens. Frosted tempered glass lens. 
Lamping: 50W maximum T4 halogen. Lamp is included with fixture. Lower wattage lamps are acceptable. Electrical Assembly: Bi-pin socket type (GY6.35) with 250° C high temperature teflon coated wire leads. Fixture is pre-wired with 18 AWG Black, white and ground wires. Step-down transformer reduces line voltage to 12 volts. Transformer is potted/encapsulated and features thermal overload protection. Can be used with energy-efficient halogen lamp.
WARRANTY: Three-year limited warranty. 
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards. 
Height: 7 7/16" (189mm)
Width: 6 7/8" (175mm)
Length: 3 7/16" (128mm)

VoltageLamp WattageFinishStock
WBMT14-AFlood Light Less Shroud w/Integral Transformer, Clear Lens & Lamp120v35W T3BlackNon Stock
WBMT14-HFlood Light Less Shroud w/Integral Transformer, Clear Lens & Lamp120v35W T3BronzeNon Stock
WBMT14F-AFlood Light Less Shroud w/Integral Transformer, Frosted Lens & Lamp120v35W T3BlackNon Stock
WBMT14F-HFlood Light Less Shroud w/Integral Transformer, Frosted Lens & Lamp120v35W T3BronzeNon Stock