HADCO HORIZON & PAGODA PATH LIGHTS - LOW VOLTAGE, LINE VOLTAGE & LED

SHOP BY CATEGORY

The charm and unique character of Horizon Pathlights are reflected in their individual styling. They create a soft luminescent ambience, free of glare, because of their hidden light source.

Hadco P3 Small Horizon Die-cast Aluminum Line Voltage PathLyte
Lamping: 75W maximum A19 lamp. Lamp is not included. Lower wattage lamps are acceptable. Electrical Assembly: Medium base phenolic socket with nickel-plated screw shell and center contact. Fixture is pre-wired with 18 AWG Black, white and ground wires.

Hadco PL3 Small Horizon Die-cast Aluminum Low Voltage PathLyte
Lamping: 27W maximum S-8 (1156) lamp. Lamp is included with fixture. Lower wattage lamps are acceptable. Electrical Assembly: Single contact bayonet (S-8). 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

Housing: Die-cast aluminum. Stem is extruded aluminum. Fasteners are 300 Series stainless steel. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately. 
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications. 
Optical Assembly: Painted, tempered glass jar with clear glass top. Spun aluminum reflector with white thermoset powdercoat.

WARRANTY: Three-year limited warranty.

CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards. 
Height: 18 1/2" (470mm)
Width: 6" (152mm)

Hadco P39 2 Tier Pagoda Aluminum Contemporary Path Light

Lamping: 75W maximum A19 lamp. Lamp is not included. Lower wattage lamps are acceptable. Electrical Assembly: Medium base phenolic socket with nickel-plated screw shell and center contact. Fixture is pre-wired with 18 AWG Black, white and ground wires.

Hadco PL39 Die-cast Aluminum Low Voltage PathLyte

Lamping: 27W maximum S-8 (1156) lamp. Lamp is included with fixture. Lower wattage lamps are acceptable. Electrical Assembly: Single contact bayonet (S-8). 12 volt fixture is pre-wired with 6-ft. Pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

Housing: Die-cast aluminum. Stem is extruded aluminum. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.

Finish: Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications. Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. 

Optical Assembly: Clear tempered glass lens.

WARRANTY: Three-year limited warranty.

CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.

Height: 7" (178mm)
Width: 6" (152mm)

Hadco RB30 Horizon Aluminum Line Voltage Bollard

Height : 32 1/4" (818mm)
Width: 10 1/8" (257mm)

Fluorescent 
BALLAST: HID ballasts are HPF core and coil, factory wired and tested, mounted to a key-slotted removable tray with quick disconnect for easy installation. Ballasts shall provide +/-5% lamp power regulation with +/-10% input voltage regulation. Fluorescent ballast is electronic (-20° F cold weather start).

HOUSING: Die-cast aluminum. Constructed of 5" diameter extruded aluminum (1/8" wall). Head assembly is mounted to lower housing with three (3) stainless steel screws. Fasteners are 300 series stainless steel. Gasketing is silicone. 

FINISH: Optional CraftStone™ finish is highly weather-resistant and bonded to the aluminum substrate. Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B117 specifications.

OPTICAL ASSEMBLY: Clear molded glass lens. Highly reflective white paint on spun aluminum rings, mounted on the underside of louvers.

ELECTRICAL ASSEMBLY: 26W Fluorescent socket is a GX24Q-3 base. 32W Fluorescent socket is a GX24Q-3 base. 42W Fluorescent socket is a GX24Q-4 base. Standard quad-volt core and coil mounted on removable ballast bracket, with quick connect harness, high power factor, dipped in moisture-resistant epoxy coating. Fluorescent uses electronic ballasts.

INSTALLATION & MOUNTING: VOLTAGE CAUTION: Some local interpretation of the NEC Section 210-6 only permit the use of 120 volt fixtures when they are mounted below 8'. Check with local authorities before specifying alternate voltages. Lower casting is secured to anchor foundation by three (3) galvanized steel bolts and nuts. Before installing anchor bolts, contact factory for latest mounting template.

WARRANTY: Three-year limited warranty.

CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.

Hadco R3 Die-cast Aluminum Line Voltage PathLyte

Lamping: 100W maximum A19 lamp. Lamp is not included. Lower wattage lamps are acceptable. Electrical Assembly: Medium base phenolic socket with nickel-plated screw shell and center contact. Fixture is pre-wired with 18 AWG Black, white and ground wires.

Hadco RL3 Large Horizon Die-cast Aluminum Low Voltage PathLyte

Lamping: 27W maximum S-8 (1156) lamp. Lamp is included with fixture. Lower wattage lamps are acceptable. Electrical Assembly: Single contact bayonet (S-8). 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

Housing: Die-cast aluminum. Stem is extruded aluminum. Fasteners are 300 Series stainless steel. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.

Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.

Optical Assembly: Painted, tempered glass jar with clear glass top. Spun aluminum reflector with white thermoset powdercoat. 

WARRANTY: Three-year limited warranty.

CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.

Height: 18" (457mm)
Width: 9 1/8" (232mm)

Hadco R39 Horizon Pagoda Path Light

Housing: Die-cast aluminum. Removable roof for easy relamping. Stem is extruded aluminum. Fasteners are 300 Series stainless steel. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.

Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.

Optical Assembly: Clear molded glass lens.

Lamping: 100W maximum A19 lamp. Lamp is not included. Lower wattage lamps are acceptable. Electrical Assembly: Medium base phenolic socket with nickel-plated screw shell and center contact. Fixture is pre-wired with 18 AWG Black, white and ground wires.

WARRANTY: Three-year limited warranty.

CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.

Height: 10 1/8"
Width: 8 5/8"

Hadco RL4 Large Horizon Low Voltage Die-cast Aluminum PathLyte

The charm and unique character of Horizon Path Lights are reflected in their individual styling. They create a soft luminescent ambience, free of glare, because of their hidden light source.

Housing: Die-cast aluminum. Stem is extruded aluminum. Fasteners are 300 Series stainless steel. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately. 
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications. 
Optical Assembly: Frosted tempered glass lens. Spun aluminum reflector with white thermoset powdercoat.

Lamping: 20W maximum T3 bi-pin lamp. Lamp is included with fixture. Lower wattage lamps are acceptable. Electrical Assembly: Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

WARRANTY: Three-year limited warranty.

CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards. 
Height: 17 1/4" (435mm)
Width: 10" (253mm)

Hadco RL4D3 Large Horizon LED PathLyte

Housing: Cool external temperatures - all below 40°C - so the light is cool to the touch, including the lens. Perfect for high pedestrian traffic and plant life applications. Exceeds European standard EN 563 both 1 second (74°C for coated metal, 80°C for glass) and 4 seconds (61°C for coated metal, 70°C for glass) of contact. Die-cast aluminum. Stem is extruded aluminum. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately. Fasteners are 300 Series stainless steel. gasketing is silicone. 
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications. 
Optical Assembly: Frosted tempered glass lens. Spun aluminum reflector with white thermoset powdercoat. 
Lamping: Philips Lumiled Rebel, Cool White (6,000K) 
Electrical Assembly: Low voltage transformer must be ordered to power the fixtures. Input voltage range (VAC): 10.8 - 17.0. 6.5 total watts consumed. OptoElectronix electronic LED driver. UL Class 2 -10°C to 50°C mimum starting temperature. Internal surge protector built into LED driver circuit Connects directly to 12V AC or 12V DC power source. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included. 
WARRANTY: Three-year limited warranty. 
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards. 
IP RATING: IP66: Dust-tight and sealed against direct jets of water. 
Height: 17 1/4" (435mm)
Width: 10" (253mm)

Hadco Horizon Aluminum Pathlyte RL9 Low Voltage

Mushrooms offer classic styling and a graceful appearance making them suitable for most applications. Designed as a spread light, these lights produce a uniform light pattern with no objectional glare. Finishes are available in antiqued verde, Bronze, sienna, speckled stone, black and natural cast Bronze.

HOUSING: Die-cast aluminum. Stem is extruded aluminum. Roof has dual stainless steel hinge with stainless steel spring-lock for tool-less entry and relamping. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately. Fasteners are 300 series stainless steel. 
FINISH: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B117 specifications. Textured finish. 
OPTICAL ASSEMBLY: Spun aluminum reflector with white thermoset powdercoat. Frosted tempered glass sprinkler shield includes top and bottom silicone gaskets for tight seal. 
LAMPING: 20W maximum T3 bi-pin lamp. Lamp is included with fixture. Lower wattage lamps are acceptable. 
ELECTRICAL ASSEMBLY: Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included. 
WARRANTY: Three-year limited warranty. 
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.

Height : 16-3/8" (416 mm)
Width: 8" (203 mm)
Max. Weight:

Finish: A Black 
H Bronze 
T Speckled Stone

Mounting 
S7 Mounting Stake

Hadco Horizon LED Aluminum RL9D Low Voltage Pathlyte

Mushrooms offer classic styling and a graceful appearance making them suitable for most applications. Designed as a spread light, these lights produce a uniform light pattern with no objectional glare. Finishes are available in antiqued verde, Bronze, sienna, speckled stone, black and natural cast Bronze.

Specifications
HOUSING: Die-cast aluminum. Stem is extruded aluminum. Roof has dual stainless steel hinge with stainless steel spring-lock for tool-less entry and relamping. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately. Fasteners are 300 series stainless steel. 
FINISH: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B117 specifications. Textured finish. 
OPTICAL ASSEMBLY: Spun aluminum reflector with white thermoset powdercoat. 
LAMPING: 3.8 total watts consumed. 4,000K color temperature (CCT) or 3,000K. Approximately 50,000 hours of operational life (at 25 C ambient temperature and 70% lumen maintenance). >80 CRI. 
ELECTRICAL ASSEMBLY: Input voltage range (VAC): 10 - 14. 3.8 total watts consumed. Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included. 
WARRANTY: Three-year limited warranty. 
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards. 
Height : 16-3/8" (416 mm)
Width: 8" (203 mm)

CCT 
W Warm *2
C Cool *1

Finish: A Black 
H Bronze 
T Speckled Stone

Mounting 
S7 Mounting Stake 
*1 If ordering Cool CCT (C), product will read as: RL9D3A-S7
*2 If ordering Warm CCT (W) product will read as: RL9DW3A-S7

Finishes and Materials

Hadco makes it easier than ever to select the right color for your exquisite landscape
design with a full palette of colors and textures. Expand your design capabilities with new finishes that are sure to compliment your commercial or residential landscape lighting needs.

For an aged appearance Verde Brass materials have been added to the NightLife fixture choIces for a step back in time.

A= Black

G= Verde

K= Garden Green

H= Bronze