This page was from our old website and may contain outdated information. New products and information can be found through our Products menu above or the links below. Please contact us with any product information or availability questions at (888) 991-3610.

Hadco Mini StepLytes (Step Lights)

LLL AC Antique Copper StepLytes

Mount using Stainless wood screws (supplied) via key slots or use Mounting Plate MPLLL.

Hadco LLL6-AC, LLL12-AC, LLL24-AC LineLyte Copper StepLyte & Deck Lights

HADCO's new LineLyte Series provides a unique way to enhance your deck or patio area. Available in Lengths ranging from 6" to 24", these natural copper fixtures mount easily under steps or railings to provide illumination for atmosphere and safety without the need to cut holes in or deface step risers. They mount with (2) screws via key slots on the top of the fixture. These fixtures use a 10,000 hour Xenon T3 lamp (included) for superior lighting and low maintenance while the socket swivels down for easy re-lamping.

Finish AC Hand-Crafted Copper

Low Voltage 
LAMPING: 10W wedge base T3 ¼ (xenon) lamps included with fixture. Xenon lamp life is approximately 10,000 hours. Lower wattage lamps are acceptable. Lamp does not need to be protected and can be directly handled. 
ELECTRICAL ASSEMBLY: Wedge base socket type (T3-¼ or T5). Socket is hinged for easy relamping. 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

Hadco LLL6-AC, LLL12-AC, LLL24-AC LineLyte Copper StepLyte & Deck Lights

HOUSING: Seamless solid copper extrusions with solid copper ends. Tool-less lamp access. 
FINISH: Natural Copper is bright polished, untreated copper. Color will age naturally to a fine dark copper patina. 
OPTICAL ASSEMBLY: Reflector is Stainless Steel. 
INSTALLATION & MOUNTING: Two (2) Stainless #8 wood screws (supplied) via key slots. 
WARRANTY: Ten-year limited warranty. 
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.

Height : 1" (25mm)
Width: 1" (25mm)
Length: 6", 12", 24" Length

LineLyte Mounting Plate (MPLLL)

FINISH: Stainless Steel has satin Matte Finish. 
MOUNTING: Brackets attach to Linelyter with two hex nuts (included).

Bracket is inserted between two blocks or bricks, held in place by the top block.

VoltageLamp WattageFinishStock
LLL6-ACCopper Linelyte, 6"12v10w Xenon T3*CopperQuick Ship
LLL12-ACCopper Linelyte, 12"12v10w Xenon T3*CopperQuick Ship
LLL24-ACCopper Linelyte, 24"12v (2)10w Xenon T3*CopperQuick Ship
Accessories
MPLLLMounting Plate for LLLQuick Ship

Hadco 96 Line Aluminum LED Step Light

Four incredible watts of illumination
A remarkable advancement in architectural lighting built around the latest in LED technology – the 96 Line. With an integrated optical system that relies on a single fourwatt LED, this minimally scaled luminaire achieves a remarkable level of illumination. In pedestrian thoroughfares, and along stairways, 96 Line is an exciting design option.

Composite
960C Round in white
961C Round in black
962C Square in white
963C Square in black
Aluminum
960A Round
962A Square

Mounting: Wall or Ceiling Surface Mount
Voltage: UNIV 120V-277V (50 or 60 hz)

Finish: BLP Black
BRP Bronze Paint
WP White Paint
NP Black
OC Optional Color Paint, Specify RAL designation
SC Special Color Paint, Must supply color chip

The die cast aluminum base and LED optical system are an integrated package. To replace the LED, simply remove the faceplate, and install a new module. Plug and play. Fast, simple, easy does it.

An integrated LED, driver and optic allows the 96 Line to achieve maximum performance from minimal power.

Integral leveling bubble simplifies installation, assuring perfect alignment of each 96 Line steplight.

The 96 Line distributes light forward and away from the luminaire, placing the light on the walkway or interior floor. The 96 Line mounts 18" to 24" above grade, making it ideal for both interior and exterior applications. The graphic to the left illustrates the pattern of light achieved at the 18" mounting height.

Two choices of faceplates

A composite injection-molded version with an integral black finish, or die cast aluminum in the 960 and 962 styles. All faceplates are lightly textured and are provided with a UV-resistant, semi-gloss finish in standard, optional or special colors. Featuring soft corners, uniform distribution, concealed mounting hardware and consistent visual styling cues, the 96 Line is a smart and practical choice for step and aisle lighting.

Mounting

Mounting over a 3.5" or
4" Recessed Octagonal Box (not included)

Mounting

Mounting over a 4"
Recessed Square Box (not included)

96 Line - LED Steplight 4 Watt Composite Face Plate
960CLED Steplight 4W Composite Face Plate, White LED only120-277v, 50-60HZ
961CLED Steplight 4W Composite Face Plate, White LED only120-277v, 50-60HZ
962CLED Steplight 4W Composite Face Plate, White LED only120-277v, 50-60HZ
963CLED Steplight 4W Composite Face Plate, White LED only120-277v, 50-60HZ
960ALED Steplight 4W Cast Aluminum Face Plate, White LED Only120-277v, 50-60HZ
962ALED Steplight 4W Cast Aluminum Face Plate, White LED Only120-277v, 50-60HZ
OCOptional Colors - Painted Finish
SCSpecial Colors - Painted Finish
Replacement Parts - 96 Line LED Steplights, 4W White LED120-277v, 50-60HZ

Hadco DAL1, DAL1D, DCL1, DCL1D, DUL1, DUL1D LED Die-cast Aluminum, Die-cast Brass or Composite Decklyte with LED options

Die-cast Aluminum
Finish: (A) Black
(B) White
(G) Verde
(H) Bronze
(T) Speckled Stone
(U) Sienna
(SS) Stainless Steel
FINISH: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B117 specifications.
HOUSING: Body and mounting plate are cast aluminum construction.

Composite
Finish: (A) Black
(G) Verde
(H) Bronze
FINISH: Composite is textured, pressure formed, molded-in-color. 
HOUSING: One-piece injection molded ULTEM® High Performance Polymer composite.

Brass
Die-cast brass. 
FINISH: Natural Brass (N) is as-cast and tumble polished.

Low Voltage 
LAMPING: Color Temperature (CCT): 4,000K nominal or 3,000K nominal. Approximately 50,000 hours of operational life (at 25°C ambient temp. and 70% lumen maintenance). >80 CRI.
ELECTRICAL ASSEMBLY: Input voltage range (VAC): 11 - 15, (Magnetic low voltage transformer required). 1.7 total watts consumed. 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire.

LED
LAMPING: Color Temperature (CCT): 4,000K nominal or 3,000K nominal. Approximately 50,000 hours of operational life (at 25°C ambient temp. and 70% lumen maintenance). >80 CRI.
CCT W Warm 3000K or C Cool 4000K

HOUSING: Fasteners are 300 series stainless steel. 
OPTICAL ASSEMBLY: Frosted, annealed glass lens. Reflector is a stamped specular aluminum. 
INSTALLATION & MOUNTING: Two (2) Stainless #8 wood screws (supplied) via key slots. 
IP RATING: IP67: Dust-tight and dual rated - sealed against direct jets of water and against continuous immersion up to a depth of 1 meter (3.28 feet). 
WARRANTY: Five-year limited warranty. 
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.

Height : 3 1/2" (89mm)
Width: 3 1/2" (89mm)
Depth: 1 7/8" (48mm)

 VoltageLamp WattageFinishStock
DAL1-ARound Steplyte12v10W T3BlackQuick Ship
DAL1-BRound Steplyte12v10W T3WhiteQuick Ship
DAL1-GRound Steplyte12v10W T3VerdeQuick Ship
DAL1-HRound Steplyte12v10W T3BronzeQuick Ship
DAL1-SSRound Steplyte12v10W T3Stainless Matte FinishQuick Ship
DAL1-TRound Steplyte12v10W T3Speckled StoneNon Stock
DAL1DLED Round Steplyte w/LED- CCT Warm or Cool12v1.7WBlack, White, Verde, Bronze, Speckled Stone, Stainless SteelNon Stock
DAL1D_-SSLED Round Steplyte w/LED- CCT Warm or Cool12v1.7WStainless SteelNon Stock
DCL1-NBrass Round Steplyte w/Lamp12v10W T3BrassQuick Ship
DCL1DBrass Round Steplyte w/LED- CCT Warm or Cool12v1.7WBrassQuick Ship
DUL1-ARound Ultem Decklyte w/Lamp12v10W T3BlackQuick Ship
DUL1-GRound Ultem Decklyte w/Lamp12v10W T3VerdeQuick Ship
DUL1-HRound Ultem Decklyte w/Lamp12v10W T3BronzeQuick Ship
DUL1DRound LED Ultem Decklyte w/LED- CCT Warm12v1.7WVerdeNon Stock
DUL1DRound LED Ultem Decklyte w/LED- CCT Warm12v1.7WBlack or BronzeQuick Ship
DUL1DRound LED Ultem Decklyte w/LED- CCT Cool12v1.7WBlack, Verde, BronzeNon Stock