Your cart is empty.
A colorful, well-lit backyard may make your entire outdoor area more cheerful. You may not only give the exteriors a new dimension but also make the area safe and useable after dusk by using low-voltage LED step lights. They maintain a soft glow that illuminates the concrete decks, ramps, stone walls, and walkways. Here are a few things to know before beginning to utilize LED low-voltage lighting for your outdoor area.
What Makes Low-Voltage LED Lights a Good Option?
The primary factor is the security of your property after dark. You can be sure that your location will be better protected from attackers if it has adequate lighting. Additionally they offer a way to draw focus to landscape elements such as walkway borders and accent plants.
The LED Step Lights are low voltage lights, making them simpler to install. They only need a transformer, low voltage cables, and fixtures to be set up. The average homeowner can install low voltage cables since they are safer, simpler, and easier to install than 120V lines.
When compared to line voltage systems, low-voltage step lights are a more affordable choice. Transformers, wires, and LED lighting fixtures that are more expensive than incandescent lighting may be necessary. However, LED lights use significantly less energy over time and have a far longer lifespan (up to 70,000 hours). Utility costs will significantly decrease as a result, as will the cost of replacing light bulbs!
Due to their attractive appearance, LED lights are frequently chosen by homeowners. You may design a sophisticated lighting system in your garden using options with eye-catching colors and lighting effects.
What Parts Do Low-Voltage Step Lighting Require?
The low voltage LED step lights are available in a range of hues, dimensions, and designs. You can select the ideal combination to complement your landscape design.
Regardless of the style you select, each lamp has a few standard components that include: A transformer that, when inserted into a safe outlet, powers the lighting. For landscape lighting, it can cut the usual 120-volt electricity to 12 volts. For longevity, choose for fixtures with a metal or composite housing.
What Steps Are Involved in the Installation Process?
Planning out the placement of LED lights in your outside area is typically the first step in the installation procedure. Depending on the final result you hope to achieve, the installation process' length and complexity may vary. The following are the important steps:
1) Installing the Cables
Laying the fixtures in the desired locations is the first step in installing low-voltage lighting. Lay the electrical cord beside each fixture, keeping them each 8 to 10 feet apart.
2) Putting in a Transformer
The transformer can be fastened to an outside wall or a wooden stake. You can either perform the basic task yourself or employ experts.
3) Placing the lights in Position
Follow the installation instructions included with the light fixture to ensure that it is installed correctly and in accordance with the manufacturer's instructions, depending on the type of light fixture.
4) Putting the Fixtures Together
When everything appears to be in order, connect the cable to every fixture, and then cover the trench with topsoil. In order to safeguard low voltage wires and preserve aesthetics, only a few inches of earth should be covered over them.
These are the fundamental procedures for installing low-voltage LED lights outside. Remember all of these ideas for a beautifully lit area.
