This page was from our old website and may contain outdated information. New products and information can be found through our Products menu above or the links below. Please contact us with any product information or availability questions at (888) 991-3610.

Tech Lighting Kable Lite

Kable Lite Kits

Installation Options/Ideas:

Installation Options/Ideas:

Tiella 800CBL5P Accent 5-Light Cable Kit

800CBL5PN

Accent Rail Kit (5 Head) Cable Kit with 5 Accent Heads, Matte Nickel, lamps included

Accent Cable Kit 5 Head
100 Watt surface transformer mounts to a standard 4" square junction box with round plaster ring (provided by electrician).

Turnbuckles and anchors can be mounted to the walls or ceiling. When ceiling mounting kit, cables will drop 2" below ceiling. Includes five highly Adjustable Accent heads (20 Watts max each) that tilt between the cables and rotate 120° within their rings. The kit may be dimmed with a standard Incandescent dimmer.

Use maximum 12 volt, 20 watt, MR16 halogen bulbs with this kit.

Finish: Matte Nickel

What's in the box?

(1) 100 Watt surface transformer
(2) turnbuckles (can be mounted to the walls or ceiling)
(2) pieces of cable
(2) mounting posts
(5) Accent Head fixtures
(5) 20 watt MR16 bulbs
(5) snap rings
mounting hardware

Start with a Simple Kable Kit
Then add any lights or pendants (not included)

Further customize your design with additional cable, Standoffs and Supports from walls or ceiling to create longer runs or change directions.

Tech Lighting Kable Kits

Simplify your design by starting with a Tech Lighting Kable Kit. Cables can be separated from 2" to 36". Choose any lights or pendants to complete you custom Kable Lite.

You can further customize your design with additional cable, Standoffs and Supports from walls or ceiling to create longer runs or change directions.

All Kable Kits include:

45' of Bare Cable

Enough for a twenty foot wall-to-wall run.
#10 gauge, tinplated copper cable with a kevlar core. Rated for 300 watts at 12 volts, 600 watts at 24 volts. Load: 300 watt maximum at 12 volts to 30' before voltage drop occurs; 600 watt maximum at 24 volts to 60' before voltage drop occurs.

Two Pairs of Slimline Turnbuckles

Turnbuckles tighten and secure the cables and provide the necessary tension for a clean look. For short, straight runs (runs under 20'). Mount to wall or ceiling. When ceiling mounted, cables drop 1" from ceiling.

Magnetic Transformer with Power Feed 
Choose a 12 volt 150 watt surface transformer, 300 watt surface transformer or 300 watt remote transformer kit.

Tech Lighting 700KLKTS150, 700KLKTS300 Surface Transformer Kable Kits

700KLKTS150 150 Watt Kit List Price from:  
3 or 4 pendants or lights.
Add up to three 50 watt elements or up to four 35 or 37 watt elements.

700KLKTS300 300 Watt Kit List Price from:
Up to 6 pendants or lights.
Add up to six 50 watt elements or up to eight 35 or 37 watt elements.

Magnetic Surface Transformer mounts to a standard 4" junction box with round plaster ring (provided by electrician) and includes 24" softwire feeds.

Includes 45' of bare cable (enough for a twenty foot wall-to-wall run), two pairs of slimline turnbuckles and a 12 volt 150 watt or 300 watt surface magnetic transformer.

Finish: Chrome, Satin Nickel, White with Chrome, White with Satin Nickel

Tech Lighting LKTA300 Remote Transformer Kable Kit

LKTA300 300 Watt Remote Transformer Kable Kit List Price:  
Up to 6 pendants or lights.
Add up to six 50 watt elements or up to eight 35 or 37 watt elements.

Magnetic Remote Transformer installs in an accessible location behind the ceiling or wall. Canopy mounts to a standard 4" junction box with round plaster ring (provided by electrician) and includes 24" softwire leads.

Includes 45' of bare cable (enough for a twenty foot wall-to-wall run), two pairs of slimline turnbuckles, a power feed canopy and a 12 volt 300 watt remote magnetic transformer.

Finish: Chrome or Satin Nickel

Cable

Tech Lighting Kable Lite Cable 700KLA

700KLABAREC KL-bare cable, tin-plate, per ft List Price from:
700KLAINSCL KL-insulated cable, clear, per ft List Price from:

Bare cable is #10 gauge tinplated copper cable. Rated for 300 watts at 12 volts, 600 watts at 24 volts. Load: 300 watt maximum at 12 volts to 30' before voltage drop occurs; 600 watt maximum at 24 volts to 60' before voltage drop occurs.

Insulated cable is #10 gauge, tinplated copper cable sheathed in clear insulation. Use insulated cable where required by local codes or in coastal areas, where salty air might corrode bare cables.

Rated for 300 watts at 12 volts, 600 watts at 24 volts.
Load: 300 watt maximum at 12 volts to 30' before voltage drop occurs; 600 watt maximum at 24 volts to 60' before voltage drop occurs.

Cable is sold by the foot (0.3 m).
Order the length of the Kable Lite run x 2 and add 10 percent to feed through turnbuckles.

Connectors

Tech Lighting Cable Connectors

700PARTD1 Isolating Connectors List Price  
Dead End Connectors join cables end to end without electrical connectivity.

700PARTD2 Conductive ConnectorsList Price  
Connectors join cables end to end with electrical connectivity.

Finish: Chrome or Satin Nickel

Turnbuckles

For Long or Turning Runs - Wall or Ceiling Mounted

700PARTTC KL-Universal Turnbuckles List Price:

5.5" long, 1.75" diameter. When ceiling mounted, cables drop 2.5"
from ceiling. Pair. If mounting to metal, order isolating connector for each pair of turnbuckles (sold separately).

Finish: Chrome or Satin Nickel

For Runs Under 20' - Ceiling Mounted Only

700KWAVEC KL-Wave Turnbuckles List Price:

Use on both ends of the run. For ceiling only. Cables drop 5" from ceiling. Pair. If mounting to metal, order isolating connectors for each pair of turnbuckles (sold separately).

Finish: Chrome or Satin Nickel

For Short, Straight Runs - Wall to Wall or Ceiling Mounted

700PRTT1C KL-Slimline Turnbuckles List Price from:

Slimline Turnbuckles 700PRTT1
4" long, 0.5" diameter. When ceiling mounted, cables drop 1" from ceiling. Pair. If mounting to metal, order isolating version.
Finish: Chrome or Satin Nickel

Maintaining Tension in Turn-heavy Runs

Tech Lighting 700PARTT2, 700PARTT3 Inline Turnbuckles

700PARTT2 Inline Turnbuckle Conductive, pair List Price
700PARTT3
Inline Turnbuckle Insulated, pair List Price

Kable Lite systems with several turns will require inline turnbuckles to provide tension within the run.
inline turnbuckles.
Conductive (T2) turnbuckles continue power; insulated (T3) turnbuckles isolate power feeds from each other. Pair.

Finish: Chrome or Satin Nickel

Slimline Anchors 700PRTT0

700PRTT0 KL-Slimline anchors List Price from:

Use to secure cables at one end of run (with turnbuckles at other end). 1" long, 0.5" diameter. Pair.
Finish: Chrome or Satin Nickel

Soft Turnbuckles 700KSOFTTS

700KSOFTTS KL-Soft Turnbuckles, Satin Nickel List Price:

Stylish satin nickel turnbuckle. 4" long, 0.5" diameter. When ceiling mounted, cables drop 1" from ceiling. Pair. If mounting to metal, order isolating connectors for each pair of turnbuckles (sold separately).
Finish: Satin Nickel

Soft Anchors 700KSOFT0S

700KSOFT0S KL-Soft anchors, Satin Nickel List Price:

Use to secure cables at one end of run (with turnbuckles at other end). 1" long, 0.5" diameter. Pair.
Finish: Satin Nickel

Mounting to Cable Lights to Brick, Cement or Plaster

700PRTD14 Brick/Cement Anchors, pair List Price
700PRTD15
Plaster Anchors, pair List Price

Turnbuckles and anchors come standard with mounting hardware for drywall. To mount to other surfaces, order this special hardware. Sold in pairs.

Standoffs and Supports

These are just a few of the Standoffs and Supports available. Cable can run in any direction, horizontally or at diagonal angles. Let us know your needs and we will help you select the best hardware to accomplish your plan.

Ceiling Supports

Supporting Runs Over 20 Feet -Adjustable Standoff

700PRTD3 KL-Adjustable Standoff 12' List Price:  
700PRTD33 KL-Adjustable Standoff 30' List Price:

Length: 12' or 30'
Finish: Chrome or Satin Nickel

Suspension cable virtually disappears for a clean and elegant look. Wire grip allows easy adjustability. Standard with twelve feet of field-cuttable suspension cable; may also be specified with thirty feet of cable. Horizontal rod is 12" wide; field cut to desired cable separation (3.5" minimum).

Supporting Runs Over 20 Feet or Changing Cable Drop - Rigid T Standoff

Rigid T Standoff 700KTSO
700KTSO0101 KL-T List Price from:

Mounts to ceiling. Offered for a range of drops and cable separations. Not field-cuttable.

Drop: 1", 2.5", 5", 12"
Separation: 1", 2", 3.5", 5.5", 8"
Finish: Chrome or Satin Nickel

Changing Cable Drop or Turning - Rigid Post Standoff/Standoff Turn

Rigid Post Standoff 700KSO
700KSO01 KL List Price from:

Rigid Post Standoff Turn 700KSOT
700KSOT01 KL List Price from:

Can be used for cable separations from 2" to 36". Standoffs can also be specified with a turn support to provide tension for clean turns. Pair. Not field-cuttable.

Drop: 1", 2.5", 5", 12"
Finish: Chrome or Satin Nickel

Wall Supports

Kable Lite Wall Turn 700KWSO01

700KWSO01 KL List Price:

A wall turn attaches to a surface to make simple turns. Includes insulating tubing to cover where cables cross. Pair.

Finish: Chrome or Satin Nickel

Kable Lite Horizontal Turn 700PRTC6

700PRTC6 KL List Price from:

Directional hardware for making a floating horizontal turn when the ceiling is inaccessible. Includes six feet of field-cuttable cable to provide tension for turn.

Finish: Chrome or Satin Nickel

Changing Cable Drop or Turning - Rigid Post Standoff/Standoff Turn

Rigid Post Standoff 700KSO
700KSO01 KL List Price from:

Rigid Post Standoff Turn 700KSOT
700KSOT01 KL List Price from:

Can be used for cable separations from 2" to 36". Standoffs can also be specified with a turn support to provide tension for clean turns. Pair. Not field-cuttable.

Drop: 1", 2.5", 5", 12"
Finish: Chrome or Satin Nickel

Installing Cable to Cantilever from a Wall

Outside Rigger 700KWSO1202
700KWSO1202 KL-Outsize rigger List Price:

This outside rigger attaches to the wall to secure cables 12" from the wall at 2" cable separation. Use when a wall-to-wall installation is impractical and the ceiling is not accessible. Not field-cuttable. Pair.

Finish: Chrome or Satin Nickel

Additional Supports

Tech Lighting 700PARTD9, 700PARTD4 Cris-Crossing Cable Runs

700PARTD9 Power Jumpers from

Pair of power jumpers transfers power from one cable run to another. Includes 24" of insulating tubing to cover where cables cross.

Insulating Tubing

700PARTD4 Insulating Tubing, per footfrom

Clear plastic tubing insulates bare cable from another cable or metal. Sold by the foot.

Tech Lighting 700KSOHD18, 700KSOHD24 Supporting Cable on Runs with Longer Drops

700KSOHD18 KL-Heavy Duty Standoff 18" pair List Price from:  
700KSOHD24 KL-Heavy Duty Standoff 24" pair List Price from:

Use these heavy duty standoffs to support Kable Lite systems that drop 18" or 24" from the ceiling.
These longer standoffs have 4" diameter bases for stability and require a minimum 5.5" cable separation. Pair.
Not field-cuttable. May require longer hardwire feeds.

Finish: Chrome or Satin Nickel

Tech Lighting Kable Lite with K-Hello Head Elements and K-Bye-Bye Head Elements with Amber Round Glass Shield Accessories

K-Bye-Bye shown with Round Glass Shield Accessory.

Tech Lighting K-Bye-Bye Head 700KBYENC

700KBYENC K-Bye-Bye Head, Satin Aluminum List Price

Adjustable arms rotate individually. For cable separations of 3.5" to 8". Lamp rotates 360°. Satin aluminum finish. Low-voltage, MR16 lamp of up to 75 watts (not included). For Kable Lite system only.

System: Available for Kable Lite only.

Accessories & Optical Controls: Colored Lens, Dichroic Lens, Diffuser Lens, Eggcrate Louver, Linear Spread Lens, Round Glass Shield, Soft Focus Lens, UV Filter

Finish: Satin Aluminum only

Tech Lighting Kable Lite with K-Hello Head Elements and K-Bye-Bye Head Elements with Amber Round Glass Shield Accessories

Tech Lighting K-Hello 700KHELLO

700KHELLO3 K-Hello MR16/3.5" List Price:
700KHELLO5 K-Hello MR16/5.5" List Price:  
700KHELLO6 K-Hello AR111/6.6" List Price:

Highly Adjustable head tilts between cables and rotates 140° within its ring. Integral louver lens holder can hold glass lens (sold separately) or eggcrate louver (included). Satin aluminum finish. Specify low-voltage, MR16 lamp of up to 50 watts or AR111 lamp of up to 75 watts (not included). For Kable Lite system only.

System: Available for Kable Lite only.

Accessories & Optical Controls: Colored Lens, Dichroic Lens, Diffuser Lens, Eggcrate Louver, Linear Spread Lens, Soft Focus Lens, UV Filter

Finish: Satin Aluminum only
Cable Separation: 3", 5" or 6"

K-Giro shown with Mesh Backlight Shield Accessory

Tech Lighting K-Giro 700KGIR

700KGIR05 K-Giro Head 5" List Price: 
700KGIR08 K-Giro Head 12" List Price:

Adjustable arms rotate individually. For cable separations of 3.5" to 8". Lamp rotates 360°. Satin aluminum finish. Low-voltage, MR16 lamp of to 75 watts (not included). For Kable Lite system only.

System: Available for Kable Lite only.

Accessories & Optical Controls: Colored Lens, Dichroic Lens, Diffuser Lens, Eggcrate Louver, Linear Spread Lens, Round Glass Shield, Soft Focus Lens, UV Filter

Finish: Satin Aluminum only

Tech Lighting K-Jane 700KJAN

700KJAN05 K-Jane Head 5" List Price: 
700KJAN12 K-Jane Head 12" List Price:
700KJAN24 K-Jane Head 24" List Price:
700KJAN36 K-Jane Head 36"List Price:

K-Jane drops below the cables; head pivots 220° on two axes. For cable separations of up to twice the length. Field-cuttable. Low-voltage, MR16 lamp of up to 75 watts (not included). For Kable Lite system only.

System: Available for Kable Lite only.

Accessories & Optical Controls: Backlight Shield, Barndoors, Cone Glass Shield, Flight Paper, Lil Egypt Shade, Lil Wok Shade, Louver Lens Holder, Round Glass Shield, Snap Louver Lens Holder, Taza Accessory

Finish: Chrome or Satin Aluminum
Length: 5", 12" or 24"

Tech Lighting K-Johnny 700KJOH

700KJOH05 K-Johnny Head 5" List Price:
700KJOH12 K-Johnny Head 12" List Price:  
700KJOH18 K-Johnny Head 18" List Price:
700KJOH24 K-Johnny Head 24" List Price:
700KJOH48 K-Johnny Head 48" List Price:
700KJOH144 K-Johnny Head 144" List Price:

Versatile, field-cuttable, with a pivoting head to direct the beam. low voltage, MR16 lamp of up to 75 watts (not included). For Kable Lite system only. System: Available for Kable Lite only.

Accessories & Optical Controls: Backlight Shield, Barndoors, Cone Glass Shield, Flight Paper, Lil Egypt Shade, Lil Wok Shade, Louver Lens Holder, Round Glass Shield, Snap Louver Lens Holder, Taza Accessory

Finish: Chrome or Satin Aluminum
Length: 5", 12", 18", 24", 48", 144"

Tech Lighting K-Pivot 700KPIV

700KPIV01 K-Pivot Head 1" List Price from:
700KPIV02 K-Pivot Head 2" List Price: 
700KPIV03 K-Pivot Head 3.5" List Price: 
700KPIV05 K-Pivot Head 5.5" List Price: 
700KPIV08 K-Pivot Head 8" List Price:

Head swivels 220°, 2" to 8" versions pivot on horizontal axis, 1" version pivots on vertical axis only. Low-voltage, MR16 lamp of up to 75 watts (not included). For Kable Lite system only.

System: Available for Kable Lite only.

Accessories & Optical Controls: Backlight Shield, Barndoors, Cone Glass Shield, Flight Paper, Lil Egypt Shade, Lil Wok Shade, Louver Lens Holder, Round Glass Shield, Snap Louver Lens Holder, Taza Accessory

Finish: Chrome or Satin Aluminum
Cable Separation: 1", 2", 3.5", 5.5", 8"

K-Telescope shown with Mesh Backlight Shield Accessory

Tech Lighting K-Telescope 700KTEL16

700KTEL16 K-Telescope Head List Price

Arms telescope individually from 12" to 42", creating unlimited angles. For cable separations of 1" to 48". Head rotates 330° and has swivel and pivot action to direct the beam. Low-voltage, MR16 lamp of up to 75 watts, (not included). For Kable Lite system only.

System: Available for Kable Lite only.

Accessories & Optical Controls: Backlight Shield, Barndoors, Cone Glass Shield, Flight Paper, Lil Egypt Shade, Lil Wok Shade, Louver Lens Holder, Round Glass Shield, Snap Louver Lens Holder, Taza Accessory

Finish: Chrome or Satin Aluminum

Tech Lighting Kable Lite Pendants

Kable Lite with Biz Pendants

Tech Lighting Kable Lite FreeJack Connector 700KABCO

700KABCO Kable Lite FreeJack Connector List Price

Finish: Satin Nickel or Chrome.

For cable separations of 8" or less. May be field cut to desired separation (2" minimum).

This connector allows any Tech Lighting Low Voltage Kable Pendants to be suspended between two cables.

Surface Mount Kable Transformers

Single Feed

Finish: Black, Chrome, Satin Nickel or White

1 x 120v
12v
1 x 60 watts**
electronic ac
LED

700FRT60EB-LED
700FRT60EC-LED
700FRT60ES-LED
700FRT60EW-LED

List Price from

1 x 120v
12v
1 x 60 watts**
electronic ac
LED

700SRT60EB-LED
700SRT60EC-LED
700SRT60ES-LED
700SRT60EW-LED
700SRT60EZ-LED

List Price from

1 x 120v
12v
1 x 75 watts**
magnetic ac
LED

700SRT75DB
700SRT75DC
700SRT75DS
700SRT75DW
700SRT75DZ

List Price from

1 x 120v
12v
1 x 100 watts**
electronic ac

700SRT100EB-LED
700SRT100EC-LED
700SRT100ES-LED
700SRT100EW-LED
700SRT100EZ-LED*

List Price from

1 x 120v
12v
1 x 150 watts**
magnetic ac
LED

700SRT15DB
700SRT15DC
700SRT15DS
700SRT15DW
700SRT15DZ

List Price from

1 x 120v
12v
1 x 150 watts**
electronic ac

700SRT15EB
700SRT15EC
700SRT15ES
700SRT15EW
700SRT15EZ

List Price from

1 x 120v
12v
1 x 300 watts**
magnetic ac
LED

700SRT30DB
700SRT30DC
700SRT30DS
700SRT30DW
700SRT30DZ

List Price from

1 x 120v
12v
1 x 300 watts**
electronic dc

700SRT30EB
700SRT30EC
700SRT30ES
700SRT30EW
700SRT30EZ

List Price from

1 x 120v
24v
1 x 300 watts**
magnetic ac

700SRT3024DB
700SRT3024DC
700SRT3024DS
700SRT3024DW
700SRT3024DZ

List Price from

1 x 120v
24v
1 x 600 watts**
magnetic ac

700SRT60DB
700SRT60DC
700SRT60DS
700SRT60DW
700SRT60DZ

List Price from

Dual Feed

1 x 120v
12v
2 x 300 watts**
magnetic ac
LED

700SRT6024DB
700SRT6024DC
700SRT6024DS
700SRT6024DW
700SRT6024DZ

List Price from

Power Feed

Tech Lighting 700KPCEN, 700KPCEN4 Kable Lite Center Single Feed, Feed Dual Feed

700KPCEN 
Kable Lite Center Power Feed Single Feed List Price

700KPCEN4
Kable Lite Center Power Feed Dual FeedList Price

A center power feed is generally used to bring power to a Kable Lite system when the transformer or junction box cannot be located directly above the run. The power feed can be mounted to a standard 4" junction box with round plaster ring (provided by electrician),

directly to a Remote Transformer, or Kable Lite Surface Transformer when the available junction box is not located directly above the run.

The center power feed can be used anywhere within the run and includes 12' field-cuttable softwire leads. Specify single or dual-feed. Specify dual-feed when using a dual-feed transformer.

Tech Lighting 700KP4C24 Single Feed Power Feed Canopy

700KP4C24 Kable Lite Power Feed Canopy 4" Round Single Feed List Price

A single-feed canopy is mounted to a wall or ceiling adjacent to the Kable Lite run. It can be used anywhere in the run. It brings power to the Kable Lite run from a remote single-feed transformer (sold separately). The low-voltage leads from the remote transformer are connected to the canopy leads inside a standard junction box. The two leads from the canopy are 24" long and can be cut and bent in the field. To drop the Kable Lite system farther down from the ceiling, add a pair of hardwire feeds (sold separately).

Finishes: Chrome, Satin Nickel or White

Tech Lighting 700KP2C24 Single Feed Power Feed Canopy

700KP2C24B Kable Lite Power Feed Canopy 2" Square Single Feed List Price

A single-feed canopy is mounted to a wall or ceiling adjacent to the Kable Lite run. It can be used anywhere in the run. It brings power to the Kable Lite run from a remote single-feed transformer (sold separately). The low-voltage leads from the remote transformer are connected to the canopy leads inside our special 2" junction box. The two leads from the canopy are 24" long and can be cut and bent in the field. To drop the Kable Lite system farther down from the ceiling, add a pair of hardwire feeds (sold separately).

Finishes: Chrome, Satin Nickel or White

Tech Lighting 700KP4C424 Dual Feed Power Feed Canopy

700KP4C424B Kable Lite Power Feed Canopy 4" Round Dual Feed List Price

A dual-feed canopy is mounted to a wall or ceiling adjacent to the Kable Lite run. It can be used anywhere in the run. It brings power to the Kable Lite run from a remote dual-feed transformer (sold separately). The low-voltage leads from the remote transformer are connected to the canopy leads inside a standard 4" junction box. The four leads from the canopy are 24" long and can be cut and bent in the field. To drop the Kable Lite system farther down from the ceiling, add two pair of hardwire feeds (sold separately). Isolating connectors for bare cable are included to isolate power feeds from each other.

Finishes: Chrome, Satin Nickel or White

Tech Lighting 700PRC14C Power Feed Turnbuckles

700PRC14C Power Feed Turnbuckles List Price

Pair of insulated slimline turnbuckles with power feed capability. Minimum cable separation: 2"; maximum cable run: twenty feet, unless reinforced.

Use the power feed turnbuckles to pipe power from a single feed remote transformer through an accessible wall or ceiling and terminate the run. Back of wall must be accessible.

Finishes: Chrome or Satin Nickel

Tech Lighting 700KPFSO Kable Lite Power Feed Stand-off

700KPFSO01C KL-Power Feed Standoff 1" List Price  
700KPFSO02C KL-Power Feed Standoff 2.5" List Price
700KPFSO12C KL-Power Feed Standoff 12" List Price

Pair of rigid standoffs with power feed capability. Minimum cable separation: 3.5".

Power feed standoffs bring power to the cables within the run. Ceiling must be accessible.

Finishes: Chrome or Satin Nickel

Tech Lighting 700HWD Hardwire Feeds

700HWD24 KL-Hardwire Feeds 24" pair List Price  
700HWD48 KL-Hardwire Feeds 48" pair List Price
700HWD72 KL-Hardwire Feeds 72" pair List Price
700HWD96 KL-Hardwire Feeds 96" pair List Price

Lengths: 24", 48", 72", 96"

Pair of field-cuttable, hand bendable hardwire feeds to replace standard feeds. For dual-feed canopies and dual-feed surface transformers, order two pair.

Finishes: Chrome or Satin Nickel

Remote Transformers

Kable Lite Power Feed Canopies

Single Feed

List Price

4" Round Single-Feed

700KP4C24B

Kable Lite Power Feed Canopy 4" Round Single Feed

700KP4C24C

Kable Lite Power Feed Canopy 4" Round Single Feed

700KP4C24S

Kable Lite Power Feed Canopy 4" Round Single Feed

700KP4C24S

Kable Lite Power Feed Canopy 4" Round Single Feed

2" Square Single-Feed

700KP2C24B

Kable Lite Power Feed Canopy 2" Square Single Feed

700KP2C24C

Kable Lite Power Feed Canopy 2" Square Single Feed

700KP2C24S

Kable Lite Power Feed Canopy 2" Square Single Feed

700KP2C24W

Kable Lite Power Feed Canopy 2" Square Single Feed

Dual-Feed

List Price

4" Round Dual-Feed

700KP4C424B

Kable Lite Power Feed Canopy 4" Round Dual Feed

700KP4C424C

Kable Lite Power Feed Canopy 4" Round Dual Feed

700KP4C424S

Kable Lite Power Feed Canopy 4" Round Dual Feed

700KP4C424W

Kable Lite Power Feed Canopy 4" Round Dual Feed

How do I design my own Kable Lite System?

ELEMENTS (Pendants, Heads and Functional Art):

  1. Choose elements
    Check cable separation requirements. Cable separation is usually 1", 2", 3.5", 5.5", or 8". 5.5" separation has most element options.
  2. Choose Accessories and Optical Controls, if required or desired.
  3. Choose lamps, 12 or 24 volt, that do not exceed maximum wattage of element or accessory
  4. Add up total lamp wattage on system
  5. Choose finish of system and make sure all components are specified as such.
  6. Use scaled drawing as a reference.
  7. Identify mounting locations for turnbuckles and any turns in the run.
  8. Measure Length of Kable Lite run; determine distance in feet.
  9. Order two times the Length of run plus 10 percent.
  10. Choose turnbuckles to tighten cable.

Select Either

Remote Transformer
Choose:
Magnetic or electronic
12 volt or 24 volt
Single or dual-feed
Specify a Power Feed Canopy, single or dual-feed.

OR

Surface Transformer
Choose:
Magnetic or electronic
12 volt or 24 volt
Single or dual-feed

Surface Transformer

Remote Transformer

Recessed Remote Transformer

*Wattage of the transformer must meet or exceed wattage of lamps.

If powering system with more than one transformer, add Isolating Connectors to isolate the feeds from each other.

Mounting:
Determine how far below ceiling the system will drop. If using a Surface Transformer drop must exceed Height of transformer.

If mounting turnbuckles to ceiling and dropping the system a greater distance below ceiling choose either Rigid T Standoff or Rigid Post Standoff to mount before turnbuckles. Determine part number.

If cables will be making a turn off the wall specify either
Horizontal Turn or Wall Turn and determine part number.

If cables will be making a turn off the ceiling specify
Rigid Post Standoff Turn. Determine part number

If using heavier elements, such as glass pendants, or if a span of cable exceeds 20' without support, specify Adjustable Standoffs.

This outline covers only the most common Kable Lite applications, but
Kable Lite is very versatile. For other Kable Lite system options, call us at 888-991-3610.

Checklist
Make sure your Bill of Materials includes:

Transformer

Power Feed Canopy

Cable

Turnbuckles (one pair for each end)

Isolating Connectors (if necessary)

Ceiling or wall supports (if necessary)

Elements (make sure selected cable separation works with elements)

Accessories and Optical Controls

Lamps—if not included with elements; (lamps must not exceed maximum wattage of element or accessory)

Make sure all finishes match and computer numbers end with C (Chrome), G () or S (Satin Nickel)

Sample Bill of Materials for Tech Lighting Kable Lite System

Item

Quantity

Number

Description

A

2

700LICOCO

Cone Glass Shield, cobalt

B

3

700KPIV05C

K-Pivot 5.5", chrome

B

3

700KVBIZC

KV-Biz, chrome

B

3

300BLV139

12v 50 watt MR16 lamp, GE EXN 40°

D

60 ft.

700KLABARE

Bare Cable, chrome

C

1

700SRT30DW

Surface Magnetic Transformer, 12v 300 watts, white

E

2

700PARTTC

Universal Turnbuckles, chrome

F

1

700KSOT12C

Rigid Post Standoff turn 12", chrome

Kable Lite with Biz Pendants

Pendants suspended from Tech Lighting Kable Lite or Monorail are an ideal way to light an island or counter. There are 41 different Pendant options available for Tech Lighting Kable Lite System.

Tech Lighting Kable Lite

Create your own artistic illusion of floating lights with Kable Lite. Integrated parallel, low-voltage cables virtually disappear when installed. Cable can be separated from 2" to 36".

Kable Lite is a unique system featuring parallel low-voltage cables that virtually disappear, creating the illusion of floating lights. Cables are tightened between two rigid surfaces and may span a distance of up to twenty feet without additional support. In lobbies, reception areas, lofts or other high-ceilinged spaces, Kable Lite provides unobtrusive, quality light. Cables may be installed from wall to wall at any height and you can create turns within a run by including supports.

Kable Lite incorporates two thin cables installed point-to-point that are unobtrusive and become nearly invisible in application to create the illusion of floating lights.

  • Chrome and Satin Nickel mounting hardware available

  • Great solution for high ceilings as Kable Lite can be installed at any Height. For areas with lower ceilings, Kable Lite helps make a space feel larger

  • Compatible fixtures include decorative pendants, architectural heads and functional art

Top Row: K-Bye-Bye, K-Giro with Mesh Backflight Shield Accessory
Center Row: K-Hello, K-Jane, K-Telescope with Backlight Shield Accessory
Bottom Row: K-Johnny with Lil Wok Accessory, K-Pivot

Kable Lite with K-Hello Elements