This page was from our old website and may contain outdated information. New products and information can be found through our Products menu above or the links below. Please contact us with any product information or availability questions at (888) 991-3610.

Tech Lighting Wall Monorail

Wall Monorail Kits

Start with a Wall Monorail Kit
Then add any lights (not included)

Further customize your design with additional cable, Standoffs and Supports and Connectors to create longer runs or change directions.

Tech Lighting 700WMKTA300 Wall Monorail Kits

Simplify your design by starting with a Tech Lighting Wall Monorail Kit. Choose any lights to complete you custom Wall Monorail setup.

700WMKTA300C Chrome $564.80
700WMKTA300S Satin Nickel $564.80 
700WMKTA300Z Antique Bronze$601.60

You can further customize your design with additional rail, Standoffs and Connectors to create longer runs or create angles.

All Wall Monorail Kits include:

8' long Wall Monorail
Hand-bendable, field-cuttable Wall Monorail in Antique Brass with Brown Insulator, Chrome or Satin Nickel with Clear Insulator.

Decorative End Caps
One set of decorative end caps. Decorative end caps fit into ends of Wall Monorail run for a finished look.

Three Wall Monorail Standoffs 
Positions rail 1" from the wall. Use standoff supports every three feet of Wall Monorail run and at corners. Standoffs can be positioned to cover points where rails are joined.

12 volt 300 Watt Plug-in Magnetic Remote Transformer with End Power Feed
12 volt 300 watt plug-in magnetic remote transformer with end power feed with 16' cord.

Tech Lighting 700MOA Wall Monorail

700MOA24 Monorail 24" List Price from: $51.20 
700MOA48 
Monorail 48" List Price from: $80.80 
700MOA96 
Monorail 96" List Price from: $140.80

Monorail is rated for 300 watts at 12 volts, 600 watts at 24 volts. Each piece of rail is shipped with conductive connectors to join rail pieces end to end.

Color: Insulator is available in clear and brown.
Finish: Antique Bronze, Chrome, Satin Nickel.

Tech Lighting Wall Archie 700WMARCH

700WMARCH List Price from: $95.20

Clamps to Wall Monorail. 17" long with a 11" high swooping curve. Pivots at head to direct beam. Low-voltage, MR16 lamp of up to 75 watts (not included). For Wall Monorail system only.

System: Available for Wall Monorail only.

Accessories & Optical Controls: Backlight Shield, Barndoors, Cone Glass Shield, Flight Paper, Lil Egypt Shade, Lil Wok Shade, Louver Lens Holder, Round Glass Shield, Snap Louver Lens Holder, Taza Accessory

Finish: Antique Bronze, Chrome or Satin Aluminum

Tech Lighting Wall Georgi 700WMGRG

700WMGRG List Price from: $95.20

Clamps to Wall Monorail. 18" long with 3" high gentle curve. Pivots at head to direct beam. Low-voltage, MR16 lamp of up to 75 watts not included). For Wall Monorail system only.

System: Available for Wall Monorail only.

Accessories & Optical Controls: Backlight Shield, Barndoors, Cone Glass Shield, Flight Paper, Lil Egypt Shade, Lil Wok Shade, Louver Lens Holder, Round Glass Shield, Snap Louver Lens Holder, Taza Accessory

Finish: Antique Bronze, Chrome or Satin Aluminum

Telescopes from 9" to 25".

Tech Lighting Wall Telescope 700WMTEL

700WMTEL List Price from: $128.00

Clamps to Wall Monorail. Telescopes from 9" to 25". Pivots at head to direct beam. Low-voltage, MR16 lamp of up to 75 watts (not included). For Wall Monorail system only.

System: Available for Wall Monorail only.

Accessories & Optical Controls: Backlight Shield, Barndoors, Cone Glass Shield, Flight Paper, Lil Egypt Shade, Lil Wok Shade, Louver Lens Holder, Round Glass Shield, Snap Louver Lens Holder Accessory

Finish: Antique Bronze, Chrome or Satin Aluminum

Tech Lighting Wally Lite 700WMWAL

700WMWAL12 12" List Price from:$91.20 
700WMWAL24 24" List Price from:$95.20

Clamps to Wall Monorail. Available in two lengths. Pivots at head to direct beam. Low-voltage, MR16 lamp of up to 75 watts (not included). For Wall Monorail system only.

System: Available for Wall Monorail only.

Accessories & Optical Controls: Backlight Shield, Barndoors, Cone Glass Shield, Flight Paper, Lil Egypt Shade, Lil Wok Shade, Louver Lens Holder, Round Glass Shield, Snap Louver Lens Holder Accessory

Length: 12" or 24"
Finish: Antique Bronze, Chrome or Satin Aluminum

Tech Lighting 700WMOCHED Wall Monorail FreeJack Connector

Adapts any FreeJack head to Tech Lighting's Wall Monorail system. For Wall Monorail only.

  • Two-piece connector unscrews to install around Wall Monorail; FreeJack male connector fits into bottom and twists to tighten.
  • Chrome, Satin Nickel.
  • Any FreeJack head (sold separately).

Enables Free Jack Heads to be used with Wall Monorail.

Tech Lighting 700WMOS01 Wall Monorail Standoff

Use standoff supports every three feet of Wall Monorail run and at corners. Standoffs can be po sitioned to cover points where rails are joined. Positions rail 1" from the wall. Order one for every three feet of run.

For best appearance, place the last standoff 4-6" from the end of the rail, and place standoffs symmetrically.

Finish: Antique Bronze, Chrome or Satin Aluminum

Tech Lighting 700WMOCCN Wall Monorail Conductive Connectors

Conductive Connectors join sections of rail together end to end
and are included with all Wall Monorail pieces. Order separately
if cutting and rejoining rails. Pair.

Finish: Antique Bronze, Chrome or Satin Aluminum

Tech Lighting 700WMOCINC Wall Monorail Isolating Connectors

Isolating Connectors join sections of rail and isolate power feeds from each other. All dual-feed canopies are shipped with isolating connectors; order additional if required by layout. Pair.

Tech Lighting 700WMOCFXH Wall Monorail Flexible Horizontal Connectors

Flexible Horizontal Connectors join sections of rail together end to end at desired sharp horizontal angle. Pair.

Finish: Antique Bronze, Chrome or Satin Aluminum

Tech Lighting 700WMOCFXV Wall Monorail Flexible Vertical Connectors

Flexible Vertical Connectors join sections of rail together end to end at desired vertical angle. Pair.

Finish: Antique Bronze, Chrome or Satin Aluminum

Tech Lighting 700WMOCCAP Wall Monorail End Caps

Decorative end caps fit into ends of Wall Monorail run for a finished look. Pair; order one pair for each end.

Finish: Antique Bronze, Chrome or Satin Aluminum

Wall Standoffs to Cantilever from a Wall

Another option to wall monorail.

Wall Standoffs to Cantilever from a Wall

There are two types of outside riggers—one for power, one for support. Both types of outside rigger extend 36" from the wall and are field-cuttable.

Tech Lighting 700MOSORG Monorail Support Outside Rigger

700MOSORG Monorail Support Outside Rigger from $136.00

Extends from the wall, to support the rail. Use every three feet of run.

Tech Lighting 700MOPORG2 Monorail Power Outside Rigger

700MOPORG2 Monorail Power Outside Rigger from $284.80

Extends 36" from the wall to support and power rail from a remote transformer. Field-cuttable. Includes 4" round canopy and 2" square canopy.

Finish: Antique Bronze, Chrome or Satin Nickel

How do I design my own Wall Monorail?

First: Choose Wall Monorail heads.
Choose accessories, if desired.
Choose lamps, 12 or 24 volt, that do not exceed maximum wattage of element or accessory. 
Choose finish of system.

Use a scaled drawing as a reference.

A) Decide where you want the rail to run.
b) Sketch it to scale, so you know what Length you want.
Measure Length of Wall Monorail run; determine quantity and Length of Monorail pieces required. 
Specify one pair of End Caps for each open end of run.
Determine number of Standoffs needed, one for every three feet of run.

Select Either

Remote Transformer
Choose:
Magnetic or electronic
12 volt or 24 volt
Single or dual-feed Specify a Power Feed Canopy, single or dual-feed. (if using a dual feed transformer be sure to order two canopies)

OR

Surface Transformer 
Note: if using a Kable Lite Surface Transformer the transformer must be mounted adjacent to run.
Choose:
Magnetic or electronic
12 volt or 24 volt
Single Specify a Center Power Feed or End Power Feed Connector and determine part number.

*Wattage of the transformer must meet or exceed wattage of lamps.

If powering system with more than one transformer, add Isolating Connectors to isolate the feeds from each other.

Mounting:
Order Wall Monorail Standoffs.

This outline covers only the most common Wall Monorail applications. 
For other system options, call us at 954-456-1006.

Checklist
Make sure your Bill of Materials includes:

  1. Transformer
  2. Power Feed Canopy (for Remote Transformer)
  3. End or Center Power Feed (for Surface Transformer)
  4. Isolating Connectors (if necessary)
  5. Standoffs (one for every three feet of run)
  6. Wall Monorail
  7. End Caps (one pair for each open end)
  8. Elements
  9. Lamps
  10. Accessories and Optical Controls
  11. Make sure all finishes match and product numbers end with C (Chrome), G () or S (Satin Nickel)

Satin Nickel Wall Monorail with Aero shown with Amber Round Glass Shield

Sample Bill of Materials for Tech Lighting Wall Monorail System

 

ItemQuantityNumberDescription
A4700WMGRGCWMO-Georgi, chrome
B4300BLV11612v 75 watt MR16 lamp, GE EYC 38°
C1700MOA96CMonorail 96", chrome
C1700MOA24CMonorail 24", chrome
D2700MOCCAPCEnd Caps, pair, chrome
E1700AT300TRemote Magnetic Transformer, 12v 300 watts
F1700WMOP2SQCPower Feed Canopy, 2" square, chrome
G3700WMOS01CWall Monorail Standoffs, chrome

Tech Lighting Wall Monorail

Wall Monorail is a specialty low-voltage lighting system designed for gallery-style illumination. Specifically designed to bring light where you want to draw attention: artwork, merchandise or a company logo. With our new Wall Monorail FreeJack connector you can now select many more FreeJack compatible heads for use on a Wall Monorail system. Wall Monorail is also now available in our new Antique Bronze finish.

Wall Monorail is a specialty system designed to help draw attention to visual displays or markers.

  • Incorporates same rail and finish options used on the Monorail system

  • A great solution for tough-to-illuminate areas where ceiling meets wall

  • Complete selection of compatible FreeJack fixtures available by incorporating Tech Lighting's FreeJack adapter

The rail is low-voltage conductor of two individual conductive metal pieces fused together by a plastic separator. Hand-bendable, field-cuttable Wall Monorail is rated for 300 watts at 12 volts, 600 watts at 24 volts. Each piece of rail is shipped with conductive connectors to join rail pieces end to end. Order additional connectors if cutting and rejoining rails. Standard Monorail bends horizontally to a radius as small as 6" and vertically to a radius as small as 24". The Insulator is available in clear and brown.