This page was from our old website and may contain outdated information. New products and information can be found through our Products menu above or the links below. Please contact us with any product information or availability questions at (888) 991-3610.

WAC Lighting Under Cabinet Puck Lights, Button Lights, Halogen & LED Miniature Recessed Lights

WAC LEDme HR-LED87S Square LED Button Light - Recess or Surface Mount

LEDme® Button Light HR-LED87
Recessed or Surface Mount
Designed for recessed or surface mounted installations, delivering strong light output with the latest in LED technology.

  • Power: 4.8W
  • Lumens: Up to 180
  • Compares To: 20W Xenon Bi-pin
  • CRI: 85
  • Cutout: 2 1/8"
  • Dimming: 100% - 10%
  • Die-cast aluminum construction
  • 70,000 hour rated life

LEDme® Button Light Retrofit Housing available to replace recessed HR-88 halogen/ HR-86 xenon using exisiting cutout and wiring.

Finish: BK-Black, BN-Brushed Nickel, CB-Copper Bronze, CH-Chrome, DB-Dark Bronze, WT-White 
Lamp: LED 4.8W, 2700K or 3000K color temp
Includes 6 foot lead wire
*Power consumption may vary depending on the efficiency of the power supply being used

HR-LED87S-BKLED Square Button Lights 3000K ,Black

HR-LED87S-WTLED Square Button Lights 3000K ,White

HR-LED87S-BNLED Square Button Lights 3000K ,Bn

HR-LED87S-CHLED Square Button Lights 3000K, Chrome

HR-LED87S-CB               LED Square Button Lights                                                       3000K,Ch

HR-LED87S-DB               LED Square Button Lights                                                       3000K,Db

HR-LED87S-27-BK         LEDme Button Light - 2700K                                                   Square

HR-LED87S-27-WT        LEDme Button Light - 2700K                                                  Square

HR-LED87S-27-BN         LEDme Button Light - 2700K                                                   Square

HR-LED87S-27-CB         LEDme Button Light - 2700K                                                   Square

HR-LED87S-27-CH         LEDme Button Light - 2700K                                                   Square

HR-LED87S-27-DB         LEDme Button Light - 2700K                                                   Square

• Recessed or surface mounting
• Quick and easy installation
• Includes 72" lead wire
• 3000K color temperature
• 70,000 hour rated life
• UL and CUL Listed
• 5 year WAC Lighting product warranty

Construction: Die-cast aluminum fixture, stamped steel housing for surface mount. Glass beam spread lens.
Wiring: Includes 72" pre-installed wires that lead out through the top.
Transformers: Class 2, 24V remote and plug-in transformers allow for up to 20 button lights to be wired together. Use a multiple terminal block to wire up to 6 fixtures in a neat under cabinet installation without the use of open splices (see below).
Light Source: Six 3000K LEDs.
Dimming: May be dimmed to 10% with an electronic low voltage (ELV) dimmer.
Mounting: Recessed– 28" cutout hole. Compression springs hold fixture firmly in place. Surface– Screw housing cover to surface, compress springs and insert into cover. Not recommended for use in ceiling.
Finish: Black (BK), Dark Bronze (DB) and White (WT) powder coat, electroplated Brushed Nickel (BN), Copper Bronze (CB) and Chrome (CH).
Standards: UL & CUL Listed.

Miniature Recessed Fixtures

WAC HR-1135 Eyeball Miniature Recessed Lighting

Low Voltage Miniature Recessed - HR-1135 Eyeball
Recessed fixture for use in shelving, cabinets and displays. 
Not intended for use in walls or ceilings

  • All steel construction
  • Cutout template included for recessed installations
  • Supplied with 36 inch lead wires
  • Low profile and shallow installation depth
  • Requires a Class 2 transformer
  • Order lamp separately

Finish: BK-Black, CB-Copper Bronz e, WT-White
Lamp: 12V, 35W max, MR11, order separately

HR-1135-BK     Low Voltage Mini Recessed - Eyeball

HR-1135-WT     Low Voltage Mini Recessed - Eyeball

HR-1135-CB     Low Voltage Mini Recessed - Eyeball

• All steel construction
• Not intended for use in walls or ceilings
• Cutout template included for recessed installations
• Supplied with 36 inch lead wires
• Low profile and shallow installation depth
• Requires a Class 2 transformer
• Order lamp separately
• Lamp has a 35º adjustable tilt from nadir
• The supplied clear glass lens can be replaced with one lens accessory.
• An all-in-one style recessed unit, comes with housing and trim - ready to install out of one box.
• Non-IC unit. Intended for installations where insulating materials will not be present.

Materials: Housing is steel, painted black. Electrical components within the can are a bi-pin ceramic socket with nickel plating and 18 gauge teflon insulated wires with fiberglass sleeves. A total of 30" of insulated wires lead from the socket out the top of the can to the strip-prepared ends.
Transformers: Remote Class 2 Transformer required (order separately).
Light Source: Use one MR11 20W-35W, 12V lamp (order separately).
Mounting: 2s" cutout hole. Two horizontal flat springs expand against the cut out hole to hold fixture against the surface. The insulated wires and socket are pre-installed in the housing with the wires leading out through the top of the housing. Simply connect to the remote class II transformer.
Standards: UL & CUL Listed

WAC HR-1136 Recessed Downlight Miniature Recessed Lighting

Low Voltage Miniature Recessed - HR-1136 Spot
Low voltage miniature recessed bevel trim unit with clear glass lens. Used for lighting in cabinets, displays and similar wooden applications. 
Not intended for use in walls or ceilings

  • Shallow installation depth ideal for use in shelving, cabinets and displays.
  • Mounts quickly with butterfly clips
  • Requires a Class 2 transformer (sold separately)
  • Housing: Included 

Finish: BK-Black, BN-Brushed Nickel, CB-Copper Bronze, CH-Chrome, WT-White
Lamp: 12V, 20W max, MR11, order separately

HR-1136-BK   Low Voltage Mini Recessed - Downlight

HR-1136-WT   Low Voltage Mini Recessed - Downlight

HR-1136-BN   Low Voltage Mini Recessed - Downlight

HR-1136-CB   Low Voltage Mini Recessed - Downlight

HR-1136-CH   Low Voltage Mini Recessed - Downlight

• Shallow installation depth ideal for use in shelving, cabinets and displays.
• Not intended for use in walls or ceilings
• Mounts quickly with butterfly clips
• Requires a Class 2 transformer
• Lamp has a 35º adjustable tilt from nadir
• Order lamp separately
• The supplied clear glass lens can be replaced with one lens accessory.
• An all-in-one style recessed unit, comes with housing and trim - ready to install out of one box.
• Non-IC unit. Intended for installations where insulating materials will not be present.

Materials: Housing is steel, painted black. Electrical components within the can are a bi-pin ceramic socket with nickel plating and 18 gauge teflon insulated wires with fiberglass sleeves. A total of 36" of insulated wires lead from the socket out the top of the can to the strip-prepared ends.
Transformers: Remote Class 2 Transformer required (order separately).
Light Source: Use one MR11 20W max, 12V lamp (order separately).
Mounting: 2a" cutout hole. Two flat "wing" springs expand against the cut out hole to hold fixture against the surface. The insulated wires and socket are pre-installed in the housing with the wires leading out through the top of the housing. Simply connect to the remote class II transformer.
Standards: UL & CUL Listed

WAC HR-1137 Gimbal Ring Miniature Recessed Lighting

Low Voltage Miniature Recessed - HR-1137 Gimbal Ring
Low voltage miniature recessed bevel trim unit with clear glass lens. Used for lighting in cabinets, displays and similar wooden applications. 
Not intended for use in walls or ceilings.

  • All steel construction
  • Cutout template included for recessed installations
  • Supplied with 36 inch lead wires
  • Low profile and shallow installation depth
  • Requires a Class 2 transformer
  • Order lamp separately

HR-1137-BK    Low Voltage Mini Recessed - Round Adjustable

HR-1137-WT    Low Voltage Mini Recessed - Round                                     Adjustable

HR-1137-BN    Low Voltage Mini Recessed - Round                                     Adjustable

HR-1137-CB    Low Voltage Mini Recessed - Round                                     Adjustable

HR-1137-CH    Low Voltage Mini Recessed - Round                                     Adjustable

• Shallow installation depth ideal for use in shelving, cabinets and displays.
• Not intended for use in walls or ceilings
• Mounts quickly with butterfly clips
• Requires a Class 2 transformer
• Order lamp separately
• Lamp has a 35º adjustable tilt from nadir
• The supplied clear glass lens can be replaced with one lens accessory.
• An all-in-one style recessed unit, comes with housing and trim - ready to install out of one box.
• Non-IC unit. Intended for installations where insulating
materials will not be present.

Materials: Housing is steel, painted black. Electrical components within the can are a bi-pin ceramic socket with nickel plating and 18 gauge teflon insulated wires with fiberglass sleeves. A total of 36" of insulated wires lead from the socket out the top of the can to the strip-prepared ends.
Transformers: Remote Class 2 Transformer required (order separately).
Light Source: Use one MR11 20W max, 12V lamp (order separately).
Mounting: 2s" cutout hole. Two flat "wing" springs expand against the cut out hole to hold fixture against the surface. The insulated wires and socket are pre-installed in the housing with the wires leading out through the top of the housing. Simply connect to the remote class II transformer.
Standards: UL & CUL Listed

WAC HR-1138 Halogen Frosted Lens Miniature Recessed Lighting

Low Voltage Miniature Recessed - HR-1138 Glass Dome
Low voltage miniature recessed unit with frosted "dome" glass lens. Used for lighting in cabinets, displays and similar wooden applications. 
Not intended for use in walls or ceilings

  • Shallow installation depth ideal for use in shelving, cabinets and displays.
  • Mounts quickly with butterfly clips
  • Supplied with 36 inch lead wires
  • Requires a Class 2 transformer (sold separately)
  • Housing: Included 

Finish: WT-White
Lamp: 12V, 20W max, J-20 (included)

HR-1138-BN    Low Voltage Mini Recessed - Frosted                                    Dome

HR-1138-WT    Low Voltage Mini Recessed - Frosted                                  Dome

• Shallow installation depth ideal for use in shelving, cabinets and displays.
• Not intended for use in walls or ceilings
• Mounts quickly with butterfly clips
• Requires a Class 2 transformer
• Order lamp separately
• An all-in-one style recessed unit, comes with housing and trim - ready to install out of one box.
• Non-IC unit. Intended for installations where insulating
materials will not be present.

Materials: Housing is steel, finished in brushed nickel, gold, or white.
Electrical component within the can is a bi-pin ceramic socket with nickel plating.
Wiring consists of 30" of 18 gauge teflon insulated wires with fiberglass sleeves leading from the socket through the top of the housing.
Transformers: Remote Class 2 Transformer required (order separately).
Light Source: One JC-20 20W max, 12V lamp included.
Mounting: 2s" cutout hole. Two flat "wing" springs expand against the cut out hole to hold fixture against the surface. The insulated wires and socket are pre-installed in the housing with the wires leading out through the top of the housing. Simply connect to the remote class II transformer.
Standards: UL & CUL Listed